BEST SELLERS

In Computer Cases

1. **Cooling Efficiency**: With 140mm fans, it provides excellent airflow, helping to keep components cool during intense use. 2. **Spacious Interior**: A larger case typically offers more room for components, making it easier to install and manage cables. 3. **Versatile Compatibility**: Often supports a variety of motherboard sizes, GPU lengths, and other components, allowing for upgrades in the future.

Good Ventilation. Plenty of room.

I used to build a lot of computers for friends and co-workers. This is by far the nicest tower I have ever seen. Every aspect of it is amazing from the pass throughs to route all cables behind the MOBO, plenty of space, clean front wood panel design, great ventilation, clever location for hard drive access, nice power supply mount. This is the one to get!

Easy to work in, plenty of room. I was pleasantly surprised with the quality of the side and top panels. They pop on and off easily no tools required. Included USB-C on front panel, unlike Fractal Design :( Plenty of cable routing. I didn't expect the bottom intake fans but there are bottom intake fans in addition to the front RGB fans. I was concerned that I would need to buy some extra fans in order to have positive pressure in the case. But turns out the bottom intakes are pre-populated with black fans :)

- All outside panels, top-to-bottom, are just pull off. Each panel has magnets and clip-in mechanism. This is the easiest case to get into and out of that I've ever used. HUGE plus!!! - The fact that it can take 420mm AIO on top or front makes it so flexible. - GamerNexus tested this as one of the coolest temp cases. My experience is similar. My 9950X with Arctic Freezer III 420mm idles in high 37C-39C. My ASUS TUF RTX-4080 SUPER idles 28C-30C. And, even with all of the airflow, it's really close to silent. With noise cancelling headphones, it very likely is (though I haven't tested that yet). - The flexibility of the fan bracket above the PSU basement is so nice. It can hold up to 3 fans. I have 2 fans on it, and a clear space to let the AIO tubing easy access to motherboard. - I really like that HDDs can be mounted vertically, where wiring is, so that they don't block AIO in the basement. However, there is room down there for 2 more HDDs if you're aren't taking the space with AIO tubes. - I've always found the wood-grained cases beautiful.

Price Fan Hub for included fans Good room for cable routing Fishtank Support for AIOs Fan lighting looks great Unified F panel connector

This whole product oozes german engineering. Before the case review itself, my favorite part. It came with a small plastic container, filled with individually marked bags of every type of screw that could be needed. And dividers for the container so that each type of screw could have it's own compartments for storage. It includes a GPU support mount for if you have one of the "3 fan" GPUs. One of the included "screws" types are rubber isolation mounts for the hard drives to be mounted but isolated from vibration (and of course they include screws that fit these perfectly). Everything you could need to mount every component you have exactly how you want it. The front, right, left and front panels are all removable (they just pop off). The metal brackets you mount most things on (especially the PSU) are removable, and they attach by having a small tab of metal that rests inside the frame, and then a tiny screw that holds the bracket in against the frame. Works beautifully and the weight is not on the threads of the screws. The people who said this "doens't fit their PSU" almost definitely just used the product wrong. I have the standard PSU size which fits great (pull off the front panel and bracket for easier installation though) but there are 2 other bracket adapters with multiple mounting holes for every type of PSU. If you managed to find a PSU that doesn't fit, I honestly do not trust that PSU. It is either so old or built so far from standard practices that I would not run it in my home for safety reasons. And of course this case looks nice. Got my board with chunky graphics card, and network, and liquid cooler, spare drive and corsaid lightning node installed happily in at least 1/3rd less space. Matches perfectly with the brown wood/black metal ikea furniture most of my house is decked out in. Oh and the fiddly little wires that are the worst part of setting up a motherboard? Actually bundled together and labeled. Easiest install of those I've ever had. I can't believe how much quieter this case is. With the full metal mesh everywhere the air just circulates unimpeded. Also that metal mesh is very strong, don't understand quite how they got it as strong as they did.

- Lots of space, more than necessary for an average ATX build - Removable side panels, one to hide the cables - Four fans included (RGB) - Quiet - Plenty of options for expansion slots for your HDD/SDDs - Mounting hardware included - Solid cable management options - Provisions for an optical drive (or two) - Good ventilation - Competitive price

-case looks great -has good front IO -can fit an nhd15(kinda it depends on mb)

Quick delivery and the case is beautiful!

Well built, easy to remove front panel, external 5.25" bays, fan placement options.

All the pros of a Lian Li O11 case but much more beautiful.

Great value, very quiet, and has a ton of features. This case has the flexibility to handle almost any configuration, without breaking the bank.

Awesome look and build quality with plenty of space and extra straps and screws

Nice lighting. Enough space for cable management. Support 360mm Liquid Cooler. Theres room for an action figure next to the power supply.

-Lots of room to work in -Easy to disassemble -Cable management was effortless

This has got to be one of the best cases to build in, super compact and is very low profile. Cable management took a bit more care but it all worked out great. Asus tuf B760M motherboard cpu: i5-13600kf, gpu:4060ti, psu: tuf 850W Lian Li also has great customer service: had a stripped screw thread on the gpu support bracket and they promptly shipped me a replacement.

Spacious and affordable comes with 4 fans

Now that performance is coming in the Micro sizes, it's nice to have a case that is also smaller than the ole Mid-Towers. Also like the front facing USB ports, as they do not collect dust as easily as those that face upward! Those that do face upward have caused me all kinds of errors in the past! Nice looks, clean design.

Tons of room to build and make up different variations with cooling setups. I had a lot of fun working with this case. Using a Mini ITX motherboard I would say is best. Leaves a lot more room for a future radiator for the GPU with plenty of space for lines and cables and additional fans to be mounted at the bottom of the case. Have about a week of use with this setup and cooling is fantastic. Plus this case comes with a magnetic plastic fan filter which is awesome!! will make cleaning a lot easier being plastic and magnetic. You definitely are getting way more case that what you are paying for. The fit and finish of the case is also top tier in my opinion. Have gotten lots of compliments by friends and family on how sleek and minimalistic this case looks. Having a glass side panel is another huge step up in looks along with how good the latch is! The option of having a dedicated RGB color adjustment button is great as well! All in all I would highly recommend this case to anyone in the market for a new case. Will be keeping my eyes on Montech for future builds!