BEST SELLERS

In Computer Cases

Excellent Size Case Great Airflow Included 120mm fans * 4 (3 in front and 1 rear) Fall fans are already daisy chained and ready for motherboard RGB hookup (You do not need any additional cables, I purchased extra phantek cables and didn't require them) Tons of space, easy to open and close covers Feels Premium for a non premium price!

Good low-cost case. Easy to install. Quality was decent.

- Value - Makes cable management easy - Lots of room - It doesnt feel cheap anywhere and is very sturdy. - The flow in the case is insane & keeps everything cooler.

Easy to build in Controller was great Lots of places to tuck cables Nice and sturdy build quality Comes with a Speaker which is a plus

Everything. Literally a high end case at a budget case price. The Front panel connector is one piece. Glad they figured that one out since people like me have been taping the front panel connectors into a singe block for decades.

I purchased 4 of these style cases , 2 white and 2 black. They are absolutely beautiful and does what it was meant to do. Not cheaply made at all, nor is it flimsy or weak. It feels very strong and sturdy and has real tempered glass for its side panel vs plexie glass which is found in most other cases at this price point . The way I look at it , you are purchasing 4 very nice 140mm rgb fans and getting a free top of the line case for the cost. I highly recommend getting one asap before they either sell out or raise the prices.

Simple to work in and cable management is very easy.

Very well made, well thought out on design. Plenty of wire run room. Lots of storage for SSD, 3 1/2 drives.

Compatible with reverse connection Motherboard Plenty of room for Cables as long as you use some Zipties here and there. 3 pre installed ARGB fans that provide good cooling

The Corsair FRAME 4000D RS is a big case. Its comical that it is classified as a mid tower ATX case. It can handle EATX motherboards easily. For graphics cards, I cant imagine a card that wont fit in the cavernous interior. The case has a built in GPU support too, but my graphics card, an RTX 4080 Super, was too short to make use of the support without relocating it. I opted to just use the support that can with my card instead, but the option is nice. Speaking of graphics card options, this case allows you to rotate the back card slot panel by 90° so you can vertical mount your graphics card. Unfortunately, Corsair offers the required PCIe riser cable separately, so plan for that if you want to vertical mount your GPU. There are some very innovative engineering going on here that Ive never seen before. First, nearly every part of the case is removable. This can be cumbersome as you build since you will have an increased number of screws to keep track of as you disassemble the case panels and parts, but it is a worthwhile tradeoff to make building easier. This case is optimally designed to sit on a desktop, not at floor level, with all front I/O ports and power button on the very bottom of the case. With the clear side window, its nice to be able to hide all of the cables very easily with the modular design that allows tucking everything away. This is a case meant to be on display. A first for me, this case comes with a standardized front panel pin plug instead of individual wires for power button and LED. I have been waiting for something like this for decades. No more hunting down the user manual for pinout diagrams. Corsair does include an adapter to use individual wires in the off chance your motherboard pins do not match the plug pinout, but it worked fine for my MSI X670E Tomahawk.

fans included w controller, cable managed, lots of room for storage drives

- Toolless design for attaching/detaching case panels - six pre-installed ARGB fans - included 10 port ARGB+Fan hub - included front mesh panel to replace curved glass if desired - swing forward 2 x 140 mm fans rack*

Very nice and well designed case

This case is all around amazing. built in dust filters, 3 120mm fans, and tons of space to hold everything inside. It was able to hold my PNY 4080 graphics card, which was huge. Great company.

Love that this has room for optical drives. Built-in RGB controller is convenient too!

- Really nice looking ARGB fans with a hub in the back for easy connectability. - Very solid material, feels like quality when I carry and work around in the case.

This whole product oozes german engineering. Before the case review itself, my favorite part. It came with a small plastic container, filled with individually marked bags of every type of screw that could be needed. And dividers for the container so that each type of screw could have it's own compartments for storage. It includes a GPU support mount for if you have one of the "3 fan" GPUs. One of the included "screws" types are rubber isolation mounts for the hard drives to be mounted but isolated from vibration (and of course they include screws that fit these perfectly). Everything you could need to mount every component you have exactly how you want it. The front, right, left and front panels are all removable (they just pop off). The metal brackets you mount most things on (especially the PSU) are removable, and they attach by having a small tab of metal that rests inside the frame, and then a tiny screw that holds the bracket in against the frame. Works beautifully and the weight is not on the threads of the screws. The people who said this "doens't fit their PSU" almost definitely just used the product wrong. I have the standard PSU size which fits great (pull off the front panel and bracket for easier installation though) but there are 2 other bracket adapters with multiple mounting holes for every type of PSU. If you managed to find a PSU that doesn't fit, I honestly do not trust that PSU. It is either so old or built so far from standard practices that I would not run it in my home for safety reasons. And of course this case looks nice. Got my board with chunky graphics card, and network, and liquid cooler, spare drive and corsaid lightning node installed happily in at least 1/3rd less space. Matches perfectly with the brown wood/black metal ikea furniture most of my house is decked out in. Oh and the fiddly little wires that are the worst part of setting up a motherboard? Actually bundled together and labeled. Easiest install of those I've ever had. I can't believe how much quieter this case is. With the full metal mesh everywhere the air just circulates unimpeded. Also that metal mesh is very strong, don't understand quite how they got it as strong as they did.

The case is very cheap, so if you need several to build multiple PCs, this won't cost you a fortune. I bought 3 to build render nodes for Blender. They looked good when placed together. USB and power buttons are on the top of the case. There are cavities on the side panels to help with cable management.

Spacious Radiator bracket comes off completely All around easy to build in Plenty of airflow through stock fans.

- The aesthetic PC case you could find - Good airflow - enough room for cable management - decent front panel - The main pro of this case is the way it makes your PC look and feel