Pros: - Great build quality and loaded with features - Perfect for most buyers who intend to overclock

Cons: - Price

Overall Review: This is a fantastic motherboard and I would recommend it to anyone who wants a semi-high end motherboard solution. I will say this product should be priced in the $300-400 range at most but the $500 price point is a result of radical inflation.

Pros: -Design -Wrist pad -2 Sides -Size -Control Side

Cons: -Speed Side is way too flat and really screws up the function -Price -Lack of color selection -Sand, dirt, or any other contaminants will be a major problem on the speed side as it has no forgiveness to it (I keep my desk Meticulously clean on a daily basis and it was still a problem) I ended up using the wrist pad from the Vespula with my XTRAC RIPPER and it seems to be a perfect match.

Overall Review: This product looks cool and feels very comfortable and "at first" appeared that it was going to completely satisfy my needs. So I decided on day one I would try the control side for a few days to see how it held up and wore in. Was a little surprised at how well I liked the control side based on pad resistance and overall tracking of the mouse was consistent and precise. I did notice however the texture of the control side seemed to be wearing down the pads or feet on the mouse, quickly. At that point I decided to switch to the speed side to avoid any additional wear on my brand new $85 mouse. When I switched over to the speed side I noticed the surface was 100% smooth, but not slippery. It was actually kinda nice and tracked beautifully, just as nice as the control side. BUT if ANY sand or dirt somehow creeped its way under your mouse it was bad news, really bad news, In fact the first day I had deep scratches all over the speed side from just a couple grains of sand & rough movement

Pros: - Great overclocking (Core 2130mhz, Memory +1200 STABLE) - Nice RGB features - Great build quality - SAMSUNG MEMORY

Cons: - Power limit is capped at 122%. I've reached out to Gigabyte directly and asked about the possibility of a BIOS release that will increase the power limit and they don't have any plans to do so. It's a shame as my temps only reach about 42-43C under full load and this card begins to throttle because of the power limit. If I could increase the power limit to 130-140% It's likely the card would reach 2200mhz stable on the core.

Overall Review: Great card only limited by it's power limit, I think my GPU could push even further if the power limit was boosted. Gigabyte is probably binning their best chips for these cards based on the performance I have seen with mine: 7975-8025 graphics score in Timespy Extreme with the overclock. If you want a drop in water cooled GPU solution and and a premium binned 2080 TI chip, go with this card. Gigabyte: Release XOC bios for this card with a higher power limit (400w) so I can reach the top 25 in Port Royal. I'm sitting in the 50's in the Hall of Fame. I'd like to unlock higher clocks with my card (2200mhz core)

Pros: The SMC1000C model (600w) may be sufficient for most gaming PC's. Mine is overclocked and uses more power than most so I opted for the SMC1500C (900w) model.

Cons: - I had to look up the user manual on the APC website as there is no paper manual included in the packaging. They provide a CD with the data on it but I don't have a CD drive installed in my PC. Not worth dropping an egg but worth mentioning for those of you that have also ditched their CD drives.

Overall Review: I installed this on my high end gaming rig that peaks at around 750w usage to ensure that potential black/brown outs didn't cause any damage to my PC components or peripherals. Overall the build quality is superb and the LED display is a cool feature that you can use to monitor watts, voltage, amperage, estimated battery backup run-time based on active load. I have not used the cloud monitoring software. There are probably some good benefits with its use but it's not required. APC does offer an extra year of warranty coverage if used.

Overall Review: - Supreme build quality - Nice RGB lighting - Nickel Plated Copper block - Great cooling performance

Overall Review: I accidentally purchased two of these for my build not realizing they are aluminum. You want to be sure to never use aluminum components on a water loop build. I know EKWB make an aluminum kit for cooling but I would not suggest using it. Spend a little extra on Copper/Nickel plated blocks, copper radiators and coated brass fittings. You will have a much easier time maintaining the coolant in your loop as the better materials will react less over time and produce less corrosion.