Pros: - Onboard video - 2 PCIe slots for CrossFireX (x8 if using 2 cards) - Lots of USB ports - HDMI, DVI, and VGA connectors ONBOARD!! - Lots of tweakable options in the BIOS - runs 1066 DDR2 memory just fine - able to overclock my AMD Phenom II 720 BE to 3.5Ghz (200mhz x 17.5) by only changing multiplier...and didn't change voltage one bit!! It was completely stable and probably could have upped it even more!! - Vista probably would have screamed using this hardware! - mobo runs VERY COOL and stable; overclocking is easy - 6 SATA RAID ports (S.M.A.R.T. only works in RAID mode)

Cons: It was hard to install WinXP using SATA/RAID controller drivers; gives blue screen when trying to install straight to SATA HDDs. I've slipstreamed drivers for the VIA 8237 SATA RAID Controller, and it was much easier. So, I had to use "Native IDE" mode for SATA in order to install Windows XP. No biggie though. I just installed XP using IDE mode, then moved cable over to RAID side. It works perfectly.

Overall Review: - memory runs best in "Unganged" mode on this board (MUST use EPP mode for 1066 speed) My Systems specs: - Antec 300 Black Steel Midtower Case - AMD Phenom II X3 720 @ 3.2Ghz (OC'd) - GIGABYTE GA-MA790GP-UD4H - SAPPHIRE 100265 HDMI Radeon HD 4830 512MB 256-bit GDDR3 PCIe x16 - G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel - Western Digital Caviar SE16 WD3200AAKS 320GB 7200 RPM SATA II - LITE-ON 22X DVDRW Burner - ZEROtherm BTF90 92mm Silent UFO CPU Cooler - Windows XP SP3

Pros: Cheap price

Cons: - Not enough motherboard mount posts came with the case for an ATX motherboard (9 required, but it only came with 4) - parts seem non-standard so you cannot use spare parts. If I could get more motherboard mounting posts and screws, I would would at least five this 4 eggs. Right now...only 2

Overall Review: VERY tight fit, better for mini-ATX rather than ATX

Pros: - Great upgrade if you have a tri-band WiFi 7 router - Works with AMD motherboards - Great upgrade/replacement for WiFi 5 (802.11ac) that comes with the Gigabyte X570 AORUS ELITE WIFI motherboard. - Works flawlessly with my TP-Link WiFi 7 Tri-Band router - MLO feature works FLAWLESSLY

Cons: - Doesn't come with drivers (also noted when buying the product)

Overall Review: I upgraded the WiFi on my Gigabyte X570 AORUS ELITE WIFI from the Intel AC to WiFi 7 using this module. You will need to remove the I/O shield and the motherboard from the case to install it. Works flawlessly with my TP-Link WiFi 7 Tri-Band router. Make sure to get the latest drivers from Microsoft Update Catalog by searching for "Qualcomm FastConnect 7800 Wi-Fi 7 HBS". Ensure you set up an SSID for MLO on your Tri-band WiFi 7 router and connect to it for improved connectivity and reduced latency.

Pros: - Great Condition: no smudges or damage to keyboard, screen, or case. - Came in what seemed to be original packaging. - Charges using a USB-C cable. - Can be upgraded to latest MacOS.

Cons: - Bad battery: says I need to take it in for service - Will only work when connected to power cable (due to bad battery).

Overall Review: Nice MacBook Pro in pristine condition for a refurb. I wish the battery was at least 80% capacity or I would have given at least 4 eggs.

Pros: - Layout of MOBO is very good. - SATA ports along the bottom-right edge. - Built-in WiFi is good (one of the things Intel is really good at) - Heatsinks on all major parts. - 2oz Copper PCB

Cons: - Expensive, but well worth the cost - Audio ports are not color-coded, but this is to maintain conformity to the aesthetics of the motherboard.

Overall Review: - Definitely recommended if you have a higher-end Ryzen 3600 or higher.

Pros: - 256-bit memory interface - 2GB graphics RAM - Plays many games @ 1080P without ANY lagging

Cons: - a bit longer than I expected...make sure to measure inside of your case!!

Overall Review: -Definitely recommended!!