Q: Can this be set to scan l > r & r < l like the scanner on KITT from knight rider please?

It doesn't have custom settings. It has pick a solid color or strobe a rainbow of colors that can be slowed down to a slow pulse. Or white used as a strobe effect that can be slowed to a pulse as well. The only other setting is brightness. Hope this helps. Cheers!

Q: Are they magnetic strips? Because I see some say magnetic and some say 3m adhesive

They are 3m adhesive, mine have been in my case for over a year and still are stuck good

Q: what do you have to plug the block into?

You plug it into a 4-pin power cable that would connect to your PSU

Q: how long is(are) the strip(s) that come with this?

about a foot long, they are trimmable if necessary, highly flexible to go around corners in your case

Q: If I purchased a few of these kits would 1 remote work all of the leds? And another question, ideally I am looking to to route these things all over my case, top panel, front panel included are there any extensions to make this possible... Or would each kit nee to be ran fairly closer together?

Yes. There are decent length cords and one longer extension included, and a single controller unit so it all works together. The frequency on the remote will affect multiple units if you have them. I was building my PC with this kit, and one for a friend, and when they were both on the remote would affect both kits from a few feet away.

Q: How does this work when cutting the strips? I've never used case lighting before, but this sounds really bizarre.

You just cut the connection between the lEDs (small space). You don't have to since the strips are flexible and can use adhesive around edges.

Question 1

Are they magnetic strips? Because I see some say magnetic and some say 3m adhesive

Accepted Answer

The ones I bought were 3m adhesive, which works really, really well in terms of sticking to the case and staying on. Had it on for almost a year, with zero problems. Residue was left behind when I decided to remove them though, unfortunately.

Question 2

Is there any way to select  a whitish/creamish color?

Accepted Answer

Sorry I took so long to reply, but the answer is kind of. It is more of a yellowish, creamish.  What i think you are looking for will not be on the controller. But personally i think it is a great rgb controller, lots of settings and easy to use and set up. took me about 10 min to install, manage the wires, and figure out the settings.

Question 3

Do they get hot?

Accepted Answer

No, these do not get hot, I have had them for a while and if you touch them, it feels like touching a room temperature water bottle (which is not hot) and they do not affect your thermals (your temperatures)

Question 4

Can this be set to scan l > r & r < l like the scanner on KITT from knight rider please?

Accepted Answer

It doesn't have custom settings. It has pick a solid color or strobe a rainbow of colors that can be slowed down to a slow pulse. Or white used as a strobe effect that can be slowed to a pulse as well. The only other setting is brightness. Hope this helps. Cheers!

Question 5

Are they magnetic strips? Because I see some say magnetic and some say 3m adhesive

Accepted Answer

They are 3m adhesive, mine have been in my case for over a year and still are stuck good

Question 6

what do you have to plug the block into?

Accepted Answer

You plug it into a 4-pin power cable that would connect to your PSU

Question 7

how long is(are) the strip(s) that come with this?

Accepted Answer

about a foot long, they are trimmable if necessary, highly flexible to go around corners in your case

Question 8

what is the wattage draw from this?

Accepted Answer

Max wattage is 120mW

Question 9

If I purchased a few of these kits would 1 remote work all of the leds? And another question, ideally I am looking to to route these things all over my case, top panel, front panel included are there any extensions to make this possible... Or would each kit nee to be ran fairly closer together?

Accepted Answer

Yes.  There are decent length cords and one longer extension included, and a single controller unit so it all works together.  The frequency on the remote will affect multiple units if you have them.

I was building my PC with this kit, and one for a friend, and when they were both on the remote would affect both kits from a few feet away.

Question 10

How does this work when cutting the strips?  I've never used case lighting before, but this sounds really bizarre.

Accepted Answer

You just cut the connection between the lEDs (small space).  You don't have to since the strips are flexible and can use adhesive around edges.

Questions & Answers