Digi IX30 LTE-A Cat 7 North America, FirstNet Capable, dual Ethernet, RS-232/422/485, GNSS

Cellular connectivity:
FirstNet Capable LTE-Advanced Cat 7
LTE-Advanced Cat 7 FDD: B2, B4, B5, B7, B12, B13, B14 FirstNet®, B25, B26, B66, B71;
TDD: B41, B42, B43, B48
WCDMA: B2, B4, B5
GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
Connectors: (3) 50 SMA (2x cellular, 1x
GNSS); center pin: female
SIM slots: (2) Mini-SIM (2FF)
SIM security: Secured in cellular module
GNSS: Protocol NMEA 0183 V 3.0; Acquisition Time Hot Start 1 s; Warm Start 29 s; Cold Start 32 s;
Accuracy Horizontal: < 2 m (50%), < 5 m (90%); Altitude: < 4 m (50%), < 8 m (90%); Velocity: < 0.2 m/s
Software and management:
Remote management: Digi Remote Manager®, SNMP v1/v2c/v3 (user installed/managed), SMS
Local management: Web UI (HTTP/HTTPS); CLI (Telnet, SSH, Serial)
Management / troubleshooting tools: FTP, SFTP, SCP; protocol analyzer with PCAP for Wireshark; event logging with Syslog and SMTP; NTP/SNTP
Ethernet:
Ports: (2) RJ-45; 10/100 Mbps (auto-sensing)
Serial:
(1) DB-9 DTE
RS-232/422/285
Signal support: TXD, RXD, CTS, DTR, DCD, DSR, RI
Flow control: software (XON/OFF), hardware supported
I/O:
Connector: 12-pin screw down terminal block
Digital: 0-30 VDC, 200 mA max.; (4) I/O, software-selectable; pulse counter input
Analog: (4) analog I/O; 4-20 mA or 0-10 V, software-selectable; 12-bit resolution
USB:
Ports: (1) USB 2.0 Type A; 5 V 500 mA max
Physical:
Dimensions (L x W x H): 12.8 cm x 10 cm x 5.2 cm ( 5.04 in x 3.94 in x 2.05 in)
Weight: 0.5 kg ( 1.1 lb)
Status LEDs: Signal Strength (5), LTE, Power
Enclosure/Rating: Aluminum / IP30
Mounting: DIN rail mount
Power requirements:
Power input: 9 30 VDC, 18 W min power source required
Power connector: Screw down removable terminal block
Power consumption: 1.5 W (light traffic flow), 3.5 W (peak data transmission); 1 W (low power mode, idle traffic, no serial/no Ethernet WAN)
Environmental:
Hazardous (Class 1 Div 2): Yes
Operating temperature: -34° C to 74° C (-29° F to 165° F); reduced cellular performance may occur above 60° C (140° F)
Storage temperature: -40° C to 85° C (-40° F to 185° F)
Ethernet isolation: 1.5 kV RMS
Serial port protection (ESD): 15 kV
Relative humidity: 5% to 95% (non-condensing)
Approvals:
Cellular (IX30-00P7): PTCRB, Verizon, T-Mobile, AT&T, FirstNet Capable; visit www. digi. com/resources/certifications for latest cellular certifications
Safety: Hazardous
locations: ANSI/ISA- 12.12. 01-2015, CAN/CSA C 22.2 NO. 213-15;
Ordinary locations: UL 62368-1, 2nd Edition, 2014-10-14; UL 62368: 2014, 2nd Edition;
ATEX standards: Protection method II 3 G Ex nA IIC T4 Gc; EN 60079- 0:2012 +A 11:2013, EN 60079- 15:2010, DEMKO 15 ATEX 1574X Rev. 1
IECEX standards: US/UL/ExTR 17.0077 /00
Emissions / Immunity: CE, RED, FCC Part 15 Subpart B, ICES-003, AS/NZS CISPR 322
Environmental: RoHS3