Question 1

will it fit a 1060 duel fan? Thank you.

Accepted Answer

I believe you could fit one. I do not recommnend it though because the case lacks ventilation and it’ll make your gpu run hotter.

Question 2

how big of a power supply does it fit?

Accepted Answer

You can angle in (turn it to get to fit initially) a larger 1000 watt power supply if you want.  I would recommend a full size 550 watt power supply if you don't want to fight with it.  If you do go with a longer power supply it might also interfere with the DVD bays in the front.

Question 3

Dos this have a disc slot?

Accepted Answer

1. The Disk drive you install in the case
2 USB Disk drive you just plug into a USB Port
3 you insert the Cd into Which ever CD drive you buy 
4 install windows

I bought that same case its small so I bought a USB cd drive to save space inside my case. But if you still don't understand I say just go to YouTube there's a lot of quick videos on " How to"

Question 4

I have a 10 inch graphics card that I would like to put in here with a micro atx board. The case says that it can support up to a 13 inch card, but I don't see how that's possible since there is a big metal wall blocking half of the case... Can anyone explain how I would get a graphics card in there? Thanks

Accepted Answer

You can unscrew the metal wall and put it back in if you want. Your card shouldn't hit the metal plate when re-installed.

Question 5

does it come with fans?

Accepted Answer

Yes fan in the front and one fan for rear exhaust.  Front fan has a light in it.  120mm, and smaller fan in the exhaust 85 or 90mm it's smaller than the front.

Question 6

can i fit a hyper 212 evo in this badboy?

Accepted Answer

The MA01-G can support a 147mm (5.7 in) CPU cooler the Hyper 212 EVO is (according to the overview from newegg) 159mm (6.3 in) which means that, sadly, they do not go together.

Question 7

It comes with a 80mm rear fan, but I see there is holes for a bigger fan. What size is that for, 92 or 120mm?

Accepted Answer

Well its really easy to identify.  the case comes with 120mm fan installed int the front, also optional mounts for a 120mm fan on side cover.  and an 80 mm in the back.   So if a 120mm fan doesnt fit in the back and there are optional holes in the back its probably a 90mm fan mount.

Question 8

I did see a hole inside the case near the psu mount and I also see a bulge on the side panel would hide the cables, hence cable management. is this possible with this case? thank you very much.

Accepted Answer

Yes, this is possible with this case providing that your power cables are not too thick. There's about an inch of space.

Question 9

Can the dvd door be removed easily and will the dvd drive mount flush with front of case, and work correctly?  Power supply is top or bottom mount?  If top mounted is there enough room for easy cable management?

Accepted Answer

The DVD slot cover comes off easy, make sure you take the front panel off to do that. The DVD drive will mount flush to the front. The power supply is top mount. There is some cable routing spaces but not much. I had no trouble cable routing, but it can get a little tight with a DVD drive in there. Planning cable routing before doing any plugging in will help make the job easier. I ended up putting all unused power supply cables above DVD drive. I designed and built two computers using this case and DVD drives for a local pantry and neither have any issues.

Question 10

if i get a, MSI PRO B450M PRO-VDH PLUS AM4 AMD B450 SATA 6Gb/s USB 3.1 HDMI Micro ATX AMD Motherboard with 8 standoff holes will this case support it?

Accepted Answer

It will fit i had the same kind of motherboard in this case and it fit no problem

Questions & Answers