9V 2A Power Supply Adapter UL Listed 100V-240V AC to DC 9Volt Compatible with 9V Devices 2A 1.5A 1A 0.5A 2000mA 1500mA 1000mA 500mA - Not for Battery Charging.

[9V 2A
Power Supply Worldwide Input: ] 100 - 240Vac 50Hz / 60Hz
Output Voltage: 9V DC9V +9V 9Volts 9.0V.
Output Current: 0 -2000mA
Maximum Power: 18W.
DC Power Cord Cable: Length 1.5 M / 4.92 Feet.
DC Male Barrel Plug: 5.5 * 2.5 mm (Center Positive +)[High Compatibility with 9V Devices] Designed to power a wide array of 9V electronics requiring up to 2A current. It's an ideal replacement or backup for devices rated at 9V 2A (2000mA) 1.5A (1500mA) 1A (1000mA) 0.5A (500mA) and other amperages below 2A.
(Note: Not for battery charging). [DC 9V Power Cord
Compatibility with: ] for 9V Schwinn bike 170 270 430 A10 A15 A20 A25 101 102 103 112 113 120 122 123 126 130 131 140 150 201 202 203 206 212 213 220 222 223 226 227P 230 231 240 418 420 428 431 450 460 470 004-4150 CY41-0900500; for 9Volts Arduino UNO R3 REV 3 / Mega 2560 R3 / Elegoo UNO R3 / IEIK UNO R3. (Not For the 2010 version of the Schwinn 420 Elliptical) [Protection and
Composition: ]
Certified by: CE FCC ETL Rohs and etc certified. Over Voltage Protection/ over current Protection/ short circuit protection/over charge protection. Made by ABS flame-retardant plastic. No noise no fire hazard.
Before Purchase:
1.
Device Check: Ensure your device needs 9V DC and draws 2A.
2.
Parity Match: Confirm the plug polarity is Center Positive (+).
3.
Connector Fit: Verify the plug size (ID/OD) fits your device's jack.
4.
Usage Note: This is a regulated power supply not a charger. Do not use for charging batteries unless your device has its own charging circuit.