Skip to main content
  • $52.48
  • Free 30-day Returns
  • Sold by YOUCAILI

    Shipped by YOUCAILI

    Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    ELECNEXUS PCIe 4.0 x16 Riser Cable 100mm Vertical GPU Mount RTX 4090/4080 | Near-Zero Signal Loss, 64GB/s, Triple EMI Shield, 6-Layer PCB, 5U gold, RTX 4090/4080/4070, RX 7900 XTX/7800 XT

    • . , - Unleash full 64GB/s bidirectional (32GB/s per direction 2x the bandwidth of PCIe 3.0) on a CPU-direct PCIe 4.0 x16 slot. Controlled-impedance traces and tuned shielding keep the signal eye clean under sustained 4K gaming and rendering no speed drops, no stuttering.
    • , Mount the graphics card vertically to display it in full and improve airflow around the GPU; a clean vertical setup frees up space and makes a high-end card the centerpiece of any SFF or showcase build.
    • - , °/° The soft 30AWG flat cable routes cleanly around tight case corners and bends 90° or 180° without kinking. It frees the motherboard slot from lateral stress, lowering bent-slot and poor-contact risk.
    • & - - Triple protection an independent metal shield, foil-wrapped signal pairs, and tinned copper braiding blocks EMI from CPU coolers, PSUs, and RGB controllers. The thickened 6-layer PCB resists bending fatigue, while 5U gold-plated contacts lower resistance and resist oxidation for lasting, reliable connections.
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    ELECNEXUS PCIe 4.0 x16 Riser Cable Display Your GPU at Full Speed When space is tight and your graphics card deserves to be seen, the ELECNEXUS PCIe 4.0 x16 Riser Cable lets you mount your GPU vertically without sacrificing an ounce of performance. Built for SFF builders, custom-rig enthusiasts and clean showcase systems, it pairs full Gen4 bandwidth with serious shielding and a slim, foldable flat cable so your high-end card stays fast, stable and beautifully presented. Full PCIe 4.0 x16 Bandwidth, Near-Zero Signal Loss Experience up to 64GB/s bidirectional throughput (32GB/s per direction 2x PCIe 3.0) on a CPU-direct PCIe 4.0 x16 slot. Controlled-impedance traces and tuned shielding keep the signal eye clean under sustained 4K gaming and rendering no speed drops, no stuttering. Fully backward compatible with PCIe 3.0. Triple EMI Shielding & Premium Build An independent metal shield, foil-wrapped signal pairs and tinned-copper braiding block interference from CPU coolers, PSUs and RGB controllers. The thickened 6-layer PCB resists bending fatigue, while 50U gold-plated contacts lower resistance and resist oxidation for lasting, reliable connections. Ultra-Flexible Flat Cable The soft 29AWG flat cable routes cleanly around tight corners and bends through your build without kinking, freeing the motherboard slot from lateral stress and lowering bent-slot or poor-contact risk. Offered in black or white to match your build. Broad Compatibility & Easy Setup Works with RTX 40/30 Series and RX 7000/6000 Series GPUs including RTX 4090, 4080, 4070 and RX 7900 XT, 7800 XT, 6900 XT on a CPU-direct PCIe 4.0 x16 slot (Intel 11th Gen / Ryzen 5000 or newer; older setups run at PCIe 3.0). Plug and play with no drivers or BIOS settings. Before You Install Measure the slot-to-GPU distance first and leave extra length for bends. Always power off and unplug before installing hot-swapping is not supported. Seat both connectors until latched. If the GPU is not detected or the system won't boot, check the connections and your BIOS/UEFI PCIe settings. Backed by ELECNEXUS 12-month warranty and friendly customer support.

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: 30 days
    • This item is covered by YOUCAILI Return Policy

    Manufacturer Contact Info

    LOADING...