Question 1

Will this work with? 
GIGABYTE GA-P55-USB3 LGA 1156 Intel P55 USB 3.0 ATX Intel Motherboard

When I installed them my computer will not boot.

Accepted Answer

Your motherboard supports:  Intel Core™ i7/ Core™ i5 processors delivering native support for DDR3 memory up to 2200+MHz.  So yes they should work.

If you don't get to your BIOS then its probably one of the following:  Make sure they are completely seated.  These were a really tight fit and I had to crank on them.

Memory has to be installed in banks.  Both chips should be in bank A for your motherboard (to the best of my knowledge).  The only other problem could be your motherboard requires both banks to be filled.  Unlikely.  Last resort go to GIGABYTE and check their help.  http://www.gigabyte.us/support-downloads/support-downloads.aspx

I doubt if your the first person to run into this.  Best of luck.

Question 2

is this non ECC?

Accepted Answer

If you read the specifications under the products description you will see that they are not ECC, I have 4 of these in my computer and work great for gaming

Question 3

does this replace ddr3 cl8-8-8-21
pc 3 10600 or do they work together
I have two spots open on my mother board?

Accepted Answer

Check your motherboard memory compatibility list. Older motherboards would step the speed of the faster memory back to the match the slower memory, however newer motherboards can run two different types of memory utilizing to different speeds but slot placement is important in that case. Always consult your MB manual.

Question 4

Trying to get ready for Fallout 4 with a PC I built the week before Fallout: NV came out. I've got an ASUS M4A89GTD PRO/USB3 mobo, and want to make sure this is the BEST RAM I can get. Is this the right call?

Accepted Answer

Yes it is the right call but modern ganes doesn't need more than 8GB's of ram. If you're a multi tasker like I am, this ram is perfect. Low latency, good frequency, this ram is reliable.

Question 5

Is this a good choice for my Gigabyte GA-H61M-D2P-B3 motherboard? I haven't upgraded anything on my computer for several years so I'm not 100% this is the proper memory I need.

Accepted Answer

I use these in most of my builds, I pretty much use Gigabyte boards exclusively. These ara a good match for your board.

Question 6

I'm looking to upgrade the memory on my Alienware Aurora desktop. I currently have 3x2 gigs of PC3-10660 RAM running at 1333 MHz. Could I replace 2 of the DIMMs with this product and run 18 GB of RAM?

Accepted Answer

Do not mix your memory some mother boards will reject it and will not boot or default to the slowest speed memory chips installed. Go with MB specks on max size and speed and do paired sets or x4 sets will get you max speed and stability.

Question 7

Looking to install this memory in a Asus Z-87 Deluxe, i7-4770k any advice?

Accepted Answer

I use this ram in my Photoshop machine and my son runs on his Sabertooth Z-77.  No problems after a year or more.  G.Skill seems to be a high performer and very reliable in our experience.

Question 8

Is this non-ecc?

Accepted Answer

While I never ended up using this product myself, I did look at the product page and it says "ECC: No" on the specifications page. Hope that helps.

Question 9

Can I put 16GB RAM in a ASUS CM6330_CM6630_CM6730_CM6830?  It says max 8GB of RAM but is that per slot?  I have 2 RAM slots total and Win 7 Home Premium.

Accepted Answer

Hello,

Thank you for contacting us in regards to your question.

The particular desktop you have mentioned supports a maximum total memory of 8GB, unfortunately this kit would exceed the maximum supported memory for that unit's system board.  For the maximum spec that would be supported by your desktop, we would suggest a 2x4GB kit.

Thank you, 
Newegg Support

Question 10

How do you attach these sticks to the windows 10?

Accepted Answer

First you meed to know if you have the memory slots for a desktop open usually the left side of the case find the slots one slotight already filled make sure your power is off flip the white or blue tabs outward pull out you memory reverse this process to install push evenly tabs should try to close

Questions & Answers