Question 1

is it dual channel RAM?

Accepted Answer

yes it is dual channel

Series 	Trident 	
	Memory Type 	DDR3 	
	Capacity 	4GB (2GBx2) 	
	Multi-Channel Kit 	Dual Channel Kit 	
	Tested Speed 	1600MHz 	
	Tested Latency 	8-8-8-24-2N 	
	Tested Voltage 	1.60v 	
	Registered/Unbuffered 	Unbuffered 	
	Error Checking 	Non-ECC 	
	SPD Speed 	1333MHz 	
	SPD Voltage 	1.50v 	
	Fan lncluded 	No 	
	height 	55 mm / 2.17 inch 	
	Warranty 	Lifetime 	
	Features 	Intel XMP (Extreme Memory Profile) Ready

Question 2

I've had these for a few years now running on a motherboard/CPU combo that I'm pretty sure can't run these ram chips at higher speeds then 1333mhz.

What would be the recommended timings for these chips if they have to be run at 1333mhz on a system that just won't run them at 1600mhz?

I've been looking all over the internet for info on recommended timings and voltage for these chips at 1333mhz.

Also my motherboard is a older board that everything really does have to be set manually.

I'd really appreciate info on what the manufacturer recommends for running at 1333mhz (timing and voltage).

Accepted Answer

-------------------------=STD=            =XMP1=
DRAM Speed             1333               1666
DRAM Voltage            1.5v                 1.6v
DRAM tCL                     9                      8
DRAM tRCD                  9                      8
DRAM tRP                     9                      8
DRAM tRAS                   24                    24
DRAM tRFC                   73                    88
DRAM tWR                   10                    10
DRAM tWTR                  5                       6
DRAM tRRD                   4                       6
DRAM tRTP                    5                      6
DRAM tFAW                  20                    30

NewEgg would make this easier if I could of posted an image of my bios. The default state should have the =STD= timing and voltage. My motherboard has BioStar insight, highly recommend BioStar TA970 for a budget AMD system.

Questions & Answers