Color Temperature and Brightness Comparison to Meet Your Preferences
3 Watts - 6500 Kelvin
- AC voltage: 100-120V
- Luminous Flux: up to 240 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
5 Watts - 6500 Kelvin
- AC voltage: 85-265V
- Luminous Flux: up to 400 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
3 Watts - 3000 Kelvin
- AC voltage: 100-120V
- Luminous Flux: up to 240 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
5 Watts - 3000 Kelvin
- AC voltage: 85-265V
- Luminous Flux: up to 400 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
Smart solution in your Home!
Functions and Specifications
The lamp has a photosensitive internal switch that only allows this night light to be activated on when the ambient light is low, or dark. At this time this light will turn on automatically if the infrared detector triggers, such as when someone walks into its area of detection. The light will stay on for about 30 seconds after the detection.
- Built-in Motion and Light sensors.
- Advanced technologies for best lighting and energy saving.
- 23 bright LED chips, that has minimum 35,000 hours lifespan.
- 3W total power, consumption less than 2KWh/year.
Forget about dark areas!
Functions and Specifications
The lamp has two sensors: PIR motion sensor and light sensor. This allows the lamp to be turned on only in dark or ambient environments, excluding the need to turn on or off the light switch mechanically.
- Will provide illumination in up to 200 square feet room.
- The light usually stays on for 30 seconds, if no movement was detected.
- The sensitivity of motion detection is around 3-4 meters.
- Soft and bright light beam that will be spread 180 degree.
- The ability to change the direction of the light is wonderful, thanks to flexible neck.
Just Plug and Play!
Functions and Specifications
Nothing else needs to be performed but to plug this light in!
According to the light of environment adjust the light of the lamp. When it becomes dark, this night lamp will light up automatically. When the the environment becomes brighter, the night lamp will shut down automatically.
Multi-Purpose Use!
No need to turn on your bright ceiling light each time!
Install this light over garage door opener to give light when walking in or out.
Basements are no longer dark to enter.
Light up the areas under your feet in laundry rooms and stairs.
Make the Most out of this Light!
For rooms that has light switches in strange places
The light switch is far from your reach? No worries!
Fix this issue in bedrooms, closets, hallways, kitchens and corridors.
Great inexpensive fix without having to pay and electrician.
Your Pets will be more than Happy!
Great inexpensive fix
This can be a perfect overhead or under feet light in your foyer, bathroom, pet areas, under the stairs, next to cat box, in any entrance areas.
Color Temperature and Brightness Comparison to Meet Your Preferences
3 Watts - 6500 Kelvin
- AC voltage: 100-120V
- Luminous Flux: up to 240 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
5 Watts - 6500 Kelvin
- AC voltage: 85-265V
- Luminous Flux: up to 400 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
3 Watts - 3000 Kelvin
- AC voltage: 100-120V
- Luminous Flux: up to 240 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
5 Watts - 3000 Kelvin
- AC voltage: 85-265V
- Luminous Flux: up to 400 lumens
- Light Beam Angle: 180 degree
- Motion Sensor Angle: 90 degree
- Max Sensitive Range: 4 meters
Smart solution in your Home!
Functions and Specifications
The lamp has a photosensitive internal switch that only allows this night light to be activated on when the ambient light is low, or dark. At this time this light will turn on automatically if the infrared detector triggers, such as when someone walks into its area of detection. The light will stay on for about 30 seconds after the detection.
- Built-in Motion and Light sensors.
- Advanced technologies for best lighting and energy saving.
- 23 bright LED chips, that has minimum 35,000 hours lifespan.
- 3W total power, consumption less than 2KWh/year.
Forget about dark areas!
Functions and Specifications
The lamp has two sensors: PIR motion sensor and light sensor. This allows the lamp to be turned on only in dark or ambient environments, excluding the need to turn on or off the light switch mechanically.
- Will provide illumination in up to 200 square feet room.
- The light usually stays on for 30 seconds, if no movement was detected.
- The sensitivity of motion detection is around 3-4 meters.
- Soft and bright light beam that will be spread 180 degree.
- The ability to change the direction of the light is wonderful, thanks to flexible neck.
Just Plug and Play!
Functions and Specifications
Nothing else needs to be performed but to plug this light in!
According to the light of environment adjust the light of the lamp. When it becomes dark, this night lamp will light up automatically. When the the environment becomes brighter, the night lamp will shut down automatically.
Multi-Purpose Use!
No need to turn on your bright ceiling light each time!
Install this light over garage door opener to give light when walking in or out.
Basements are no longer dark to enter.
Light up the areas under your feet in laundry rooms and stairs.
Make the Most out of this Light!
For rooms that has light switches in strange places
The light switch is far from your reach? No worries!
Fix this issue in bedrooms, closets, hallways, kitchens and corridors.
Great inexpensive fix without having to pay and electrician.
Your Pets will be more than Happy!
Great inexpensive fix
This can be a perfect overhead or under feet light in your foyer, bathroom, pet areas, under the stairs, next to cat box, in any entrance areas.