Question 1

I like the specs of the GA-78-LMT-USB. When I go to the Gigabyte website to look for a compatible CPU, I apparently can't search by motherboard, but only by CPU in long tables. Am I missing something? I want to use a CPU that draws less than 100 watts or less, preferably 65. Any recommendations will be greatly appreciated. No problem with memory, since manufacturers are set up to search by motherboard, but any suggestions are welcome

Accepted Answer

Hello Samual:

You can search by motherboard or cpu. Go to the Gigabyte site and find the motherboard, then find the compatible CPU list -- it is only for that motherboard.

However --   Go look at all the Newegg AM3+ cpus -- find the one you want - the only 2 cpus I see that are below 100 W are the 4 core (fx 4300  - 95 w)) and 6 core AM3+ (fx 6300 - 95 W).

Look at the AMD cpu in Newegg, they show the Watts.

Question 2

Is this the exact product you get the black one?
Because im pretty sure theres different Versions like 4.1 and 5 and I really want the black one(rev5,this one) for my build

Accepted Answer

I did indeed receive this exact one not too long ago (45 days or so). But I cannot be sure that that is exactly what they will ship you. I believe your chances are pretty good!

Question 3

The 8 pin power connector is throwing me off . What power supply would you recommend?

Accepted Answer

For its power requirements, this mobo uses a standard 24 pin connector for the multivoltage supply and it has an 8 pin connector for the 12V supply.  However, these 8 pins are arranged such that a standard 4 pin 12V connector will fit perfectly into the mobo 12V socket.  I actually tried it both ways - first with a power supply that had the 4 pin 12V connector and then with a power supply that had an 8 pin 12V connector.  Both worked perfectly.  If you do use the 4 pin connector cable from the power supply, make sure that the connector block is flush with one side of the mobo socket.  As far as power supply, you can use any standard ATX, micro-ATX, or even ITX power supply (provided you have enough wattage for your system).  The micro-ATX will be necessary if you are putting this mobo in a micro-STX case.

Question 4

Would this be considered a high end motherboard or a regular motherboard?

Accepted Answer

Good board has all you need for office or home. VGA HDMI excepts 4 slots RAM you decide what you need. Over all happy with it, choose a processor carefully it makes a difference AMD has worked will so far so spend a little more now depending on your needs it I worth it. Hope this helps

Question 5

What do i need to do to get this motherboard to connect to my tv? this is my first computer that ive built. Ive tried the hdmi slot no luck and  ive used the dvi to hdmi and i still had no luck please help

Accepted Answer

I own this board, so please read carefully (see review under Anerdy 1)  First off the onboard video is NOT supported by Windows 10 (no driver) You'll need a dedicated graphics card. Since I do not know your desktop's specs I'd advise an EVGA GTX 1050. It is a short card and only requires a min. of a 300 watt power supply (see review under Anerdy 1 please) ; however as I post this the ASRock AMD RX 570 4GB (see my review under Anerdy 1...far better than a GTX 1050) is one of the best price to performance deals. It is a long card @ 10.5 inches, so you'd have to see if your pc case will hold it. In addition, it requires a 64 bit operating system (Linux, Windows 7 or 10), a min. of 4GB system RAM & a min. of a 450 watt power supply with one PCI-E 8pin connector. Whatever card you buy you'll need a HDMI cable to connect from card to your HDTV. Turn your HDTV on first & under the input menu select whatever HDMI port you have that HDMI cable plugged into ex. 1,2 etc. Now turn on your desktop and after Windows loads make sure to set your resolution to match your HDTV ex. 1280x720p or, 1920x1080p. If the image does not quite fit screen go into your HDTV menu and under Picture select  Advanced  Video then select Overscan and turn it to off. Press exit on your HDTV remote.

Question 6

Does this come with a processor?

Accepted Answer

Nope! Bang for buck, go with an i7 5820k and overclock it.

Question 7

will this motherboard support windows 10?

Accepted Answer

Yes, there are even Windows 10 drivers for this board on Gigabyte's site.

Question 8

what power supply should I use for this?

Accepted Answer

This MoBo requires a 24pin ATX power connector and an 8-pin CPU power connector. Besides that, anything will work. However, consider the following things when PSU shopping:

1. Total power draw of entire system (and do you want headroom for upgrades). This is measured in Watts.
2. Physical compatibility with computer case (ATX is standard)
3. Number of specific power connectors you require (on the graphics cards, mostly)
4. Efficiency of the PSU (Look into the "80+" rating system)
5. Whether you want detachable cables (modular PSU) for ease of assembly & increased airflow

Good luck!

Question 9

I was wondering if it comes with the black and gray theme as displayed??? I have searched for the motherboard online otherwise (mostly videos) and its has a toy-like blue theme..

Accepted Answer

Mine is a gray/black theme except the memory slots, 2 are black and 2 are blue. The only other blue are the USB 3.0 connectors. It's a great motherboard.

Question 10

this board does not have a cpu power plug is that a problem?

Accepted Answer

I did not experience any issues with using this board with my existing CPU....or with  a newer CPU.

I don't know if that is because the board gets adequate power from the standard supply, or if it actually needs the 4 pin molex to provide additional power.

Again, ZERO issues with it.

Questions & Answers