Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item. - 1x 3.5 - inch Drive and 1x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation. What's in the Box 4 x Rubber Washer 8 x Mounting Screws included
Specifications: Computer power button: Making Power Computer much easier. Located computer in a hard to reach area , this is a convenient switch on the desk and hitting it rather than bend down to turn the computer on Motherboard power switch: There Are Two Buttons on the Switch. One is power button in the center and the other is a reset button. There Is a Metal Sleeve over the cable that sits nicely in the card-slot cover to prevent the cable from being accidentally pulled or disconnected from the main board. HDD LED lights in the switch. They're solid blue when it's on, and flicker pieces of red when your computer is loading or doing something memory intensive. The amount of red even seems to correspond with how much strain your computer is under, so it's easy to tell if your computer is off o...
Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Specifications: Wireless IR remote control Power - Ture On/Shut Down Speed - effect speed Accelerate/Decelerate Brightness - Increase/reduce brightness Mode Selection - click for small mode selection / 2 second long press for large mode selection Automatic Cycle Mode - Autoplay all RGB effect, 10 senconds each mode Single Color Selection - White / Red / Green / Blue single color set up 3 bottons manual control Mode switch button -switch between 6 lighting effects Speed switch button - 6 speed range cycle switching Color switch button - adjust your LED lights color and brightness levels
Dimensions: Product category: Fan Speed Controller Fan speed control: Fan knobs to control fan speed Install: Computer case 5.25"bay Fan control: 3-channel Fan control indicate: LED display Fan power: 10W Support fans: TX3 3-PIN/TX4-4PIN Power by: Molex 4pin, Fan cable length: 60cm Temp. Sensor: Sensor cable HDD LED HDD LED cable Adjustable Output voltage range: DC 5V-12V Fan speed controller range: 40% - 100%
Specifications: Bus Type:PCI Express
Type Standard:Profile (LP bracket incl.)
Chipset:NEC UPD720201
Interface: USB 3.0 Port
Type and Rate :USB 3.0 - 5 Gbit/s
Connector Type(s): 1 - PCI Express x1 Male
External Ports: 2 - USB Type-A (9 pin) USB 3.0 Female
Internal Ports : 2 x US 3.0 Internal Ports (20 pin connector) front panel for floppy bay
Internal Ports : 1 - SATA 15 pin interface
Package Contents: 1 x PCIe USB 3.0 PCI express card
1 x Driver CD