4pin to 2 3 4 SATA Power Splitter Sleeve Cable, 4 pin 90 Degree SATA Adapter Power Connector Spliter 4 HDD Hard Drive

Feature 4pin to 2 3 4 SATA Power Splitter Sleeve Cable, 4 pin 90 Degree SATA Adapter Power Connector Spliter for HDD Hard Drive

The Serial ATA standard provides for the adoption of a new 15-pin drive power connector replacing the ubiquitous 4-pin connector. However existing system cases and power supplies may have an insufficient number of SATA power connectors while still retaining the older connectors.

Thes 30~60CM adapter cable plugs into a 4-pin power plug and provides up to four 15-pin SATA power connectors.

Each SATA power connector is spaced about 15cm apart allowing four drives to be easily daisy chained to the single power line.

The power wires are contained within a net jacket to keep them neat and tidy within the system case.

The connector provides only 5 and 12 VDC power. While many SATA drives only require these power levels some require the additional 3. 3 VDC power provided for in the SATA specification. Make sure your drive does not require 3. 3 VDC before purchasing these adapter cable.

Compatible with both 2.5"" and 3.5"" Serial ATA Hard Drives

Allows the use of newer hard drives with older power supplies

4 Pin (LP4) to SATA power (15 pin) converter adatper

Voltage:12V/5V

Specifications

Length:

to 2 X SATA power cable, 30cm

to 3 X SATA power cable, 45cm

to 4 X SATA power cable, 60cm

Conductor:20AWG Bare Copper

Connector A: 4-pin LP4 Male

Connector B:SATA Power 15-pin Female