Submersible Water Pump (15W 800L/H) with Colorful LED Light for Indoor Fountain, Pool, Garden, Pond, Fish Tank, Aquarium, Hydroponic, Statuary

Highlights: 12 LED with 4 COLOR CHANGING LIGHT --- Great for Decorating your Fountain, Swimming Pool, Garden, Pond, Fish Tank, Aquarium, Hydroponic, Statuary. FEATURES --- Detachable filtering cover and back cover for easy cleaning, No need any tools to detach it, easy to seperate. 2 different nozzles allow for different tube sizes and water adjustment. GOOD DESIGN --- Mini submersible pumps - quiet work, reliability and no leakage, pleasant operation. SUITABLE WATER TYPE --- Suitable for fresh-water, salt-water. Adjustable knob to control the water flow rate.
maximum flow: 800L/H, maximum
lift: 1.6M. 100% SATISFACTION GUARANTEE --- We are extremely committed to our customers. ready to respond within 24 hours with 30-day money back guarantee and lifetime support guarantee and 12 month replacement warranty.
Specification:
Model: AT-380 (built-in 12 optical core)
Voltage: 110-120V / 220-240V
Frequency: 50Hz / 60Hz
Power: 15W
Flow: 800L /
H Spray distance: 0- 2.6
FT Lifting distance: 0- 5.2 FT
Product Size: 2.7 * 2.0 * 2.4 IN
Main material: ABS
PRECAUTIONS: Always disconnect the plug before handling the pump. Do not use it without water. Do not grab it using its cable. Use only cold water. Use the pump only if completely immersed.
ADVICES: Do not connect the pump to a different voltage than the one shown. Do not suck any flammable liquid fluids. To avoid short circuits, please use the pump only in containers not larger than 152 cms. Do not immerse into too hot water (more than 35°) (95°F).
FUNCTIONING: Neither clog up the entrance of the pump nor suck any dirty liquids. Should the pump be used on a dirty surface, lift it a bit so that a contact with debris is avoided. To lower the flood of water, use the control lever located on the side of the pump. Immerse the pump into the water before connecting it to the plug. At the very beginning, the pump may not work out properly as it might have some air inside, so just take it off the water and immerse it again: it will surely work out.
UPKEEP: Remove the frontal part of the pump and the fan and wash them under flowing water. Do not remove the drum of the pump. It the pump does not work out, please
check that: The pump and its outlet are not clogged up. Remove the frontal part and check that the fan runs the proper way.
Package Contents: LED Submersible Pump * 1 Nozzle attachment * 2