


Why is there water dripping during use?
the nozzle may not be tightly connected or the sealing ring may have loosened after extended use. Please check the nozzle connection and replace the rubber sealing ring if necessary. Replacement rings are included in the accessory kit.
Why is there no steam coming out?
Please make sure the nozzle is properly connected. After turning on the unit, allow approximately 15 seconds for the machine to heat up before steam is produced.
How do I adjust the steam intensity?
This steam cleaner features six adjustable steam levels. Briefly press the handle switch to cycle through Levels 1–6, which will be displayed on the unit.
What should I do if the steam is not hot enough?
Please wait until the unit has fully preheated. You can also check the current steam level setting and adjust it to a higher level if needed.
Are there any precautions during use?
For safety, please wear protective gloves to prevent burns when using the steam cleaner. In some cases, the steam hose may loosen during transportation. Please check and tighten the connection before use.



| Surface Recommendation | Kitchen countertops, appliances, range hoods, microwave, refrigerator, Bathroom toilets, tile, grout, mirrors, ceilings, walls, couches, upholstery, fabric, carpets, mattresses, pet mattresses, floors, windows, Cars and automotive detailing, BBQ grills, Various hard and soft surfaces |
|---|---|
| Included Components | 1 steam cleaner handheld, 1 extension nozzle, 1 nylon brush, 1 high-pressure nozzle, 1 brass brush, 1 extended sprayer rod, 2 sealing ring, 1 cleaning cloth sleeve, 1 clearing needle, 1 floor cleaning brush, 1 small scraper, 1 large scraper, 1 user manual, 1 bottom waterproof plug |
| Included Brush Heads | 1,Nylon brushes – For delicate surfaces like upholstery, fabric, and curtains 2,Brass brush – For tough surfaces like tile, grout lines, and stubborn buildup 3,Floor cleaning brush – For sealed hardwood and tile floors 4,Scrapers – For sticky residue and burnt-on grime on stovetops and ovens |
| Pro Tips | 1,Use low steam setting with fabric tools for delicate upholstery and clothing 2,Switch to high steam setting with scrubber attachments for tough grout and greasy surfaces 3,Medium setting works well for most general cleaning with narrow nozzles Pro Tip: Match the brush type to your steam level setting—use low steam with softer brushes for delicate fabrics, and high steam with brass brushes for heavy-duty kitchen and bathroom grime. |

Why is there water dripping during use?
the nozzle may not be tightly connected or the sealing ring may have loosened after extended use. Please check the nozzle connection and replace the rubber sealing ring if necessary. Replacement rings are included in the accessory kit.
Why is there no steam coming out?
Please make sure the nozzle is properly connected. After turning on the unit, allow approximately 15 seconds for the machine to heat up before steam is produced.
How do I adjust the steam intensity?
This steam cleaner features six adjustable steam levels. Briefly press the handle switch to cycle through Levels 1–6, which will be displayed on the unit.
What should I do if the steam is not hot enough?
Please wait until the unit has fully preheated. You can also check the current steam level setting and adjust it to a higher level if needed.
Are there any precautions during use?
For safety, please wear protective gloves to prevent burns when using the steam cleaner. In some cases, the steam hose may loosen during transportation. Please check and tighten the connection before use.









































