HIBOITEC 200W Low Voltage Landscape Transformer with Photocell Sensor Timer | Outdoor Lighting Transformer 120V AC to 12V/15V AC Waterproof Transformers for Landscape Lighting Path Lights

The HIBOITEC Low Voltage Landscape Transformer is designed for homeowners and DIY installers who want professional-grade outdoor lighting control without hiring an electrician. It converts 120V AC household current to 12V and 15V AC low voltage output, making it compatible with standard landscape lighting systems including LED, MR16, PAR36, and halogen fixtures. Beyond driveways and garden pathways, this transformer suits a range of outdoor applications: flagpole illumination, front facade accent lighting, patio perimeter lighting, holiday and seasonal display setups, and deck or pergola ambient lighting. Any outdoor zone where low voltage fixtures are installed can be powered and scheduled through a single unit. Full specifications: Input 120V AC / Output 12V AC and 15V AC dual tap / Available in 200W, 300W, 400W, 500W, and 600W / IP65 weatherproof rating / Operating temperature -4°F to 104°F / Galvanized steel backplate 0.9mm / Cold-rolled steel cover 0.7mm / High-temperature outdoor powder coat finish / 500-hour salt spray certified / Built-in resettable circuit breaker / Accepts 12, 14, 16, and 18 AWG wire / Wall-mount installation with pre-drilled mounting holes / FCC certified. Use the 12V output tap for cable runs under 100 feet. For runs exceeding 100 feet, switch to the 15V output tap to compensate for resistance-induced voltage drop and maintain full brightness at the farthest fixture. Both taps can be used simultaneously on separate circuits. This transformer is designed for outdoor wall-mount installation only and requires a location where the built-in photocell sensor receives direct natural daylight for accurate dusk-to-dawn detection. It is not suitable for fully enclosed indoor spaces, garages without natural light exposure, or deep soffit mounting positions. For buyers with additional questions: the unit accepts 10 AWG wire split into two 12 AWG runs for optimal performance. The resettable breaker trips automatically on overload press the reset button to restore power, no replacement parts needed. The Countdown mode counts down from dusk (not from a set clock time), so it automatically adjusts to seasonal daylight changes without reprogramming. All settings including mode, countdown duration, and zone assignments are stored in permanent non-volatile memory and restore instantly when power returns after an outage.