- Free 30-day Returns
Meet Your Seller
WiFi Antenna Pair | Fits I-PEX MHF4 | 25 cm Leads | Internal Replacement
- CONNECTOR AND LENGTH: Two 25 cm antenna leads fit card ports compatible with I-PEX MHF4. Does not fit MHF1 antenna sockets. Compare the original plug, card receptacle and required cable reach before purchase
- INTERNAL ANTENNA REPAIR: Replace missing or damaged antenna assemblies in a laptop, compact desktop or enclosure with matching card ports. Check the available mounting space and route both leads without stretching the cables
- ADHESIVE PAD MOUNTING: Secure the antenna pads inside the enclosure with their adhesive backing. Follow the device service instructions, keep cables away from fans and sharp edges, and leave clearance around moving hinges
- RADIO REQUIREMENTS: These passive antennas connect to an existing wireless card. The card determines supported bands, operating systems and drivers. Follow its antenna-port layout; antenna count does not add another radio
- PACKAGE CONTENTS: One retail set contains two internal antennas with attached leads. WIRELESS CARD, DESKTOP ADAPTER, EXTERNAL ANTENNAS AND INSTALLATION TOOLS ARE NOT INCLUDED. Select the connector and lead length for your repair
Any questions? Ask CelesteSM will help you find out quickly.
Selected version: Two 25 cm antenna leads with plugs that fit I-PEX MHF4 antenna ports. This version does not fit MHF1 sockets. Check the existing connector, mounting space and cable reach before ordering.
Replace missing or damaged internal antennas with this HighZer0 Electronics pair. Use it in a laptop, compact desktop or enclosure with matching card antenna ports and space for the selected pads and leads. Compare your original connectors and measure both cable routes before ordering; the card form factor alone does not establish antenna fit. Match each cable to its intended route; a longer lead alone does not improve reception.
Installation: Shut down the device and follow its service instructions before opening it. Align each plug with the matching receptacle and press straight down without twisting or forcing it. Route the leads clear of fans, sharp edges and hinge pinch points. Check that the case closes without pulling or crushing either cable, then position the adhesive pads where the service instructions allow.
Wireless operation: These are passive antenna assemblies for an existing wireless card. The card and its drivers determine available bands and features. Follow that card's antenna-port layout instead of assigning one lead to WiFi and the other to Bluetooth. Reception depends on antenna placement, enclosure materials, the radio and the access point. These parts do not add a radio or change the card's supported wireless standards.
Specifications: Two passive internal antennas. Lead length: 25 cm each. Connector fit: I-PEX MHF4 antenna ports. Radiators: FPC/PCB with adhesive backing.
Included: One retail set containing two internal antennas with attached leads and adhesive pads. WIRELESS CARD, DESKTOP ADAPTER, EXTERNAL ANTENNAS AND INSTALLATION TOOLS ARE NOT INCLUDED.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by HighZer0 Electronics Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















