Quick Application Tips:
1. For best results, surfaces should be cleaned with a 50-50 mixture of isopropyl alcohol and water.
2. Refrain from touching the adhesive to avoid contamination.
3. Apply tape vertically on the back of the object for even weight distribution.
4. Remove the liner and ensure object alignment with the preferred surface.
5. Make a firm press to create a strong, permanent bond.
Removal Tips:
1. Use a heat gun or steamer to reduce adhesion.
2. Lift the edges with a sharp, flat tool.
3. Peel the edges slowly in one direction at an acute angle.
IMPORTANT: This is a permanent tape and may cause surface damage or leave residue when removed !!
Q&A
Is this tape removable?
This tape is designed to bond permanently, so once it has been applied, it’s not easy to remove. But you can use WD-40, Goo Gone or a simple mixture of water and lemon oil to remove residue.
Why is difficult to remove the red protective film?
This is determined by the raw material and production process. We have provided you with a peeling tool to make it easier for you to remove the back film.
Why is the tape not as sticky as you advertised?
The adhesive strength of the tape is related to these factors: surface, pressure, time, and temperature. For maximum bonding strength, please follow the recommendations below:
1. Clean the surface before applying and make sure that the mounting surface is clean, dry, smooth and free of oil.
2. Apply some pressure to the tape before peeling off the red backing, and apply final pressure to the mounting object after mounting is complete to create a strong, permanent bond.
3. For maximum bonding strength, please do not hang heavy objects immediately after tape application and be patient for another 72 hours.
4. Ideal tape application is accomplished when temperature is between 70° F and 100°F (21°C and 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.
Why does the tape not smell very good?
The tapes are made up of raw materials such as modified acrylics, and these materials can produce some unique smells when mixed. But please don't worry, they are absolutely safe for the body. You can store the tapes in a ventilated area to reduce this smell.
 50FT |  16.4FT (2 Pack) |  33FT |  10FT |  100FT |  164FT | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Color | Grey | Grey | Grey | Grey | Grey | White |
| Material | Acrylic Foam | Acrylic Foam | Acrylic Foam | Acrylic Foam | Acrylic Foam | Acrylic Foam |
| Roll Length | 50 ft | 32.8 ft | 33 ft | 10 ft | 100 ft | 164 ft |
| Item Width | 1/2 ‘’ | 0.94 ‘’ | 0.39 ‘’ | 0.39 ‘’ | 0.39 ‘’ | 0.39 ‘’ |
| Item Thickness | 0.039 ‘’ | 0.025 ‘’ | 0.025 ‘ | 0.025 ‘’ | 0.025 ‘’ | 0.01 ‘’ |
| Style | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty |
| Pack | 1 | 2 | 1 | 1 | 1 | 1 |
Shop HitLights Collections
Heavy Duty Mounting Tape
Power Supply & Dimmable Driver
12V Warm White LED Strip Light
12V Cool White LED Strip Light
12V Waterproof LED Strip Light
12V RGB LED Strip Light
12V Standard Density LED Strip
24V COB LED Strip Light
24V High Lumen LED Strip Light
Wireless Switches & Controller
12V Electronic Dimmable Driver
24V Electronic Dimmable Driver
12V Magnetic Dimmable Driver
24V Magnetic Dimmable Driver
Driver & Dimmer Switch 2 in 1
How did we get our start?
HitLights has been specializing in LED services since 2010. We have become a major player and recognized name in the American Strip Lighting LED market in both commercial and residential industries.
What makes our products unique?
HitLights carry everything you need to achieve your desired lighting effects for your project, including linear lighting, power supply, controller, dimmer, mounting tape, etc
Why do we love what we do?
We aim to inspire and develop new ways of utilizing LED Strip Lighting Technology and provided a vast range of customization lighting components.
Quick Application Tips:
1. For best results, surfaces should be cleaned with a 50-50 mixture of isopropyl alcohol and water.
2. Refrain from touching the adhesive to avoid contamination.
3. Apply tape vertically on the back of the object for even weight distribution.
4. Remove the liner and ensure object alignment with the preferred surface.
5. Make a firm press to create a strong, permanent bond.
Removal Tips:
1. Use a heat gun or steamer to reduce adhesion.
2. Lift the edges with a sharp, flat tool.
3. Peel the edges slowly in one direction at an acute angle.
IMPORTANT: This is a permanent tape and may cause surface damage or leave residue when removed !!
Q&A
Is this tape removable?
This tape is designed to bond permanently, so once it has been applied, it’s not easy to remove. But you can use WD-40, Goo Gone or a simple mixture of water and lemon oil to remove residue.
Why is difficult to remove the red protective film?
This is determined by the raw material and production process. We have provided you with a peeling tool to make it easier for you to remove the back film.
Why is the tape not as sticky as you advertised?
The adhesive strength of the tape is related to these factors: surface, pressure, time, and temperature. For maximum bonding strength, please follow the recommendations below:
1. Clean the surface before applying and make sure that the mounting surface is clean, dry, smooth and free of oil.
2. Apply some pressure to the tape before peeling off the red backing, and apply final pressure to the mounting object after mounting is complete to create a strong, permanent bond.
3. For maximum bonding strength, please do not hang heavy objects immediately after tape application and be patient for another 72 hours.
4. Ideal tape application is accomplished when temperature is between 70° F and 100°F (21°C and 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.
Why does the tape not smell very good?
The tapes are made up of raw materials such as modified acrylics, and these materials can produce some unique smells when mixed. But please don't worry, they are absolutely safe for the body. You can store the tapes in a ventilated area to reduce this smell.
 50FT |  16.4FT (2 Pack) |  33FT |  10FT | 100FT |  164FT | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Color | Grey | Grey | Grey | Grey | Grey | White |
| Material | Acrylic Foam | Acrylic Foam | Acrylic Foam | Acrylic Foam | Acrylic Foam | Acrylic Foam |
| Roll Length | 50 ft | 32.8 ft | 33 ft | 10 ft | 100 ft | 164 ft |
| Item Width | 1/2 ‘’ | 0.94 ‘’ | 0.39 ‘’ | 0.39 ‘’ | 0.39 ‘’ | 0.39 ‘’ |
| Item Thickness | 0.039 ‘’ | 0.025 ‘’ | 0.025 ‘ | 0.025 ‘’ | 0.025 ‘’ | 0.01 ‘’ |
| Style | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty |
| Pack | 1 | 2 | 1 | 1 | 1 | 1 |
Shop HitLights Collections
Heavy Duty Mounting Tape
Power Supply & Dimmable Driver
12V Warm White LED Strip Light
12V Cool White LED Strip Light
12V Waterproof LED Strip Light
12V RGB LED Strip Light
12V Standard Density LED Strip
24V COB LED Strip Light
24V High Lumen LED Strip Light
Wireless Switches & Controller
12V Electronic Dimmable Driver
24V Electronic Dimmable Driver
12V Magnetic Dimmable Driver
24V Magnetic Dimmable Driver
Driver & Dimmer Switch 2 in 1
How did we get our start?
HitLights has been specializing in LED services since 2010. We have become a major player and recognized name in the American Strip Lighting LED market in both commercial and residential industries.
What makes our products unique?
HitLights carry everything you need to achieve your desired lighting effects for your project, including linear lighting, power supply, controller, dimmer, mounting tape, etc
Why do we love what we do?
We aim to inspire and develop new ways of utilizing LED Strip Lighting Technology and provided a vast range of customization lighting components.
