HP Z640 Revit CAD Workstation PC Intel Xeon E5-1650 v3 6-Core 12 Threads 3.5GHz 16GB RAM 500GB NVMe NVIDIA K620 Windows 10 Pro

Revit workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed Fast the better. Recommend 3Ghz or higher. Processor Cores Higher core counts are utilized when rendering. Recommend 6 cores or more. Memory (RAM) 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. Nvidia Quadro are supported and certified by AutoDesk. This workstation is certified to work with Revit.

Processor: Single Intel Xeon E5-1650v3 Six Core 3.5Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 16GB DDR4-2133 Memory Supports up to 256GB of total memory, 8 DIMM slots for DDR4 ECC Registered Memory - 4 DIMM slots on the motherboard and 4 on the Optional 2nd CPU and Memory Riser Module (included with dual processor configurations)

PCIe Solid State Drive: 500GB NVMe M.2 SSD with PCIe Adapter Card

Drive Bays: Up to two 3.5'' or 2.5'' (adapter needed for 2.5'') internal SATA, SAS or SSD hard drives 2 external 52.5'' bays

Raid Controller: Factory integrated RAID available for SATA/SAS drives (RAID 0, 0 Data, 1, 5, and 10)

Graphics: Nvidia Quadro K620 2GB GDDR3 Graphic Card, DirectX 11.2 (Certified Hardware for Revit)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: AutoDesk Revit Software is not included

Power Supply: 925W Power Supply

Optical: DVDRW Drive

Networking Integrated Intel I218LM PCIe GbE
Controller

Slots:

• Slot 1: PCI Express Gen2 x1 with open-ended connector Full-height, Half-length (Not available when 2nd processor/memory module is installed)
• Slot 2: PCI Express Gen3 x16 Full-height, Full-length (with extender)
• Slot 3: PCI Express Gen2 x4 with open-ended connector Full-height, Full-length (with extender)
• Slot 4: PCI Express Gen3 x8 with open-ended connector Full-height, Full-length (with extender)
• Slot 5: PCI Express Gen3 x16 Full-height, Full-length (with extender)
• Slot 6: PCI 32bit/33MHz Full-height, Full-length (with extender) Open-ended connector allows a greater bandwidth (eg, x16) card to be installed physically into a lower bandwidth connector/slot

Front Ports: 4 USB 3.0, 1 Headset, 1 Microphone

Rear Ports: 4 USB 3.0, 2 USB 2.0, 2 PS/2, 1 RJ-45 (NIC), 1 Audio Line-In, 1 Audio Line-Out Serial supported with optional connector on PCI bracket cabled to system board connector

Internal Ports: 2 USB 2.0 p