Your Browsing History
Meet Your Seller
HYNIXHynix Hma451R7Mfr8N-Tf Hynix Memory Module For Server-Hma451R7Mfr8N-Tf
- DDR4 2133 (PC4 17000)
- ECC Registered
- CAS Latency CL15
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Hynix Memory Module For Server
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- Read full details
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by A-Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...
LOADING...
The SK hynix HMA451R7MFR8N-TF is a 4GB DDR4-2133 ECC Registered server memory module for compatible servers and workstations that require 288-pin registered DDR4 memory.
Recommended For
- Server administrators upgrading a compatible DDR4-2133 ECC RDIMM system in small increments, where a single 4GB module fits the platform’s documented memory configuration.
- Repair technicians replacing a failed DIMM in a supported legacy server and matching the installed memory’s registered ECC type, DDR4-2133 speed, and capacity.
- IT teams maintaining specific GIGABYTE server models that list this Hynix part in their qualified-memory documentation and need a like-for-like replacement.
Real-World Use Scenarios
- Replacing a failed DIMM in a compatible DDR4 server: installing this module can restore the server’s memory capacity without replacing the entire memory set, provided the system supports this DIMM type and capacity.
- Adding memory to an older server that supports 4GB DDR4 registered DIMMs: each installed module adds 4GB, although the server’s memory-population rules and supported DIMM types determine whether it will boot and how it configures memory.
- Setting up a legacy home-lab or test server: one or more compatible modules can provide memory for learning server setup or running lightweight services; a single 4GB module offers limited headroom, so suitability depends on total installed memory and workload.
- Running memory in a server workload where ECC support is required: the module supports ECC error detection and correction, but the server, processor, and firmware must also support and enable ECC for that capability to be used.
- Checking whether it can be reused in a desktop PC: this is a registered server DIMM, so a desktop that only supports unbuffered memory may not recognize or boot with it; verify the motherboard’s supported memory type before installing.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Server memory upgrades using a 4GB DDR4 ECC registered module |
| Capacity And Configuration | 4GB DDR4 memory, configured as 2Rx8 and listed as a dual-channel kit |
| Speed And Latency | 2133 MHz (DDR4-2133, PC4-17000) with CL15 latency |
| Form Factor And Compatibility | 288-pin DDR4 SDRAM registered memory module; operates at 1.20V |
| Model Identifiers | Hynix HMA451R7MFR8N-TF |





















