Gigabit PoE+ Injector, IEEE802.3at / 802.3af, 30W Power Ethernet PoE Adapter Replacement of UBIQUITI POE Injector U-POE-at, TPE-115GI, TL-PoE160S, 10/100/1000Mbps, Up to 100M (328ft)

Note: The PSE-480080GT works for 10/100/1000Mbps Gigabit network and PoE enabled devices.

The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power.

The iCreatin PoE Injector can easily connect any IEEE 802.3af/at-compliant device to a non-PoE LAN switch port.

This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af/at powered device to a LAN switch.

Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines.

To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device.

Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems.

The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe.

Specifications

2 Gigabit Ethernet ports

Up to 30W Rated power, Supplies PoE (15.4W) or PoE+ (30W) Power, support both IEEE802.3af and iEEE802.3at

Power feed: Support Mode B;

Data rate: 10\100\1000Mbps.

Deliver power up to about 328 feet(100 meters)

Support 110-240V voltage input

What in Box?

1 x 30W Gigabit PoE plus injector

1 x US power cord"

Product information