Question 1

how big are the two fan areas on the back wall of the case?

Accepted Answer

2 x 120mm fans can occupy this area.   it is meant for a radiator to exhaust out that area of the case.  if you try to use this area as intake, you will have unfiltered air entering the case.

Question 2

Will this case support dual rx 580s?

Accepted Answer

Yes it can, however, depending on the position of your 16x slots, the bottom GPU might interfere with the bottom fan mounting points. If your bottom GPU sits in the case's 3rd and 4th slot/bracket from the bottom, then it will not interfere with your bottom fans. Otherwise, you can either use slim fans or no fans at all.

Question 3

Is water cooling something that would take much moding?

Accepted Answer

Not necessarily. As long you buy the necessary parts they can be installed without having to mod anything. Also depends if you want to use hard or soft pipes or all in one.  If you go to EKWB site, they have a configurator that can help you and helpful videos to follow. Good luck!

Question 4

Is the In Win logo the power button?  Where is the reset button located?

Accepted Answer

There is no "reset" button. What Daniel is referring to is using the power button to force shut off the CPU

Question 5

Would it be possible to mount a reservoir underneath the PSU shroud(if i drilled holes) or would ram, etc be in the way?

Accepted Answer

It might work, if your ram is not too tall, Looking at my case - I have the corsair RGB ram, there is about 3 inches of space. Though I suggest using EK's 120mm vertical reservoir mount to mount your reservoir on the vertical exhaust fans at the front.

Question 6

will the GIGABYTE GA-970A-DS3P FX (rev. 2.1) AM3+/AM3 AMD 990FX 12.01" x 8.43" fit in this case even tho it says  12.0 x 10.0 ????

Accepted Answer

Yes, will fit just fine.

Question 7

Will a Biostar TA970 fit in this case?

Accepted Answer

Dear Valued customer,

Yes, the Biostar TA970 will indeed fit in this case. Thank you for choosing In Win.

Best Regards,
In Win Development Inc.

Questions & Answers