Question 1

Does the LED lighting for the front change (RGB) or is it always blue?

Accepted Answer

Its always blue. InWin has an updated model coming soon that features RGB lighting and USB Type C port, if you want to wait.

Question 2

Do the fans come with the case? If so how many are included

Accepted Answer

No fans included. Also depending on your MB you may have to choose between bottom PCIe slot or 2nd intake case fan at the bottom. I only have one intake at the bottom which is a huge compromise I wasn't aware of. Case is real pretty and feels like solid craftsmanship.

Question 3

Could I fit a 140mm radiator (Coolermaster Nepton 140XL) in this case. I know it says 120mm mounting points only, but would a 140mm fit with a small amount of modding? i.e. drill additional mounting holes or take out a bracket.

Accepted Answer

Justin, I have little experience with water based coolers.

This is a very small case, however, if the mounting goes from front 
to back, then perhaps it would be possible.

Question 4

Could I lay this case on it's side? I know the exhaust is on one side, but will airflow still work correctly while laying down?

Accepted Answer

I would have to say no, The 2 exhaust ports are the rear and front, They push our the front, guided around the corner to the right wall (if looking at the front) where they would seep out the cool cutouts. If you laid it on it's right side you couldn't use the front one as an intake or exhaust. You would just rely on the rear 120mm and PSU fan to do all the exhausting. Not saying it's impossible, just don't count on any fans going in the front

Question 5

How to install the GPU bracket?

Accepted Answer

Bracket comes with 2 mounting screws (supplied) and can be angled depending on your GPU width/length for additional support. There are 2 holes in the case for placement and should be easy to spot (near the bottom right of any mobo once case is standing upright) for supporting the card.

For ITX mobos, one orientation of the bracket with the arm facing up supports the underside of the card whereas for mATX mobos you may have to flip the bracket so the arm faces further away so it can accommodate the card. The position of the bracket ultimately depends on which mobo form factor you go with and which PCI slot you use.

Question 6

what is the packaging dimensions?

Accepted Answer

I am not sure of your question, however, the box size is 18" long; 18" high and 10.5" wide.  The case itself is 14.5 long; 14.5 high; and 7.5 wide.  I hope this is of some helf !

Question 7

Can this hold a custom loop for CPU with a small tube reservoir??

Accepted Answer

Yes. There are images on the In Win site with a loop in it.

Questions & Answers