KuWFi 1800Mbps WiFi 6 Router Wifi POE Access Point Wifi Mesh Wireless Ceiling AP 2.4G&5.8G Gigabit Access Point Signal Amplifier

Description
-- Ceiling wireless AP with PoE and high gain antennas, ensure a stable connection in indoor high-density wireless coverage environment.
-- Adopts new generation Wi-Fi 6( 802.11 ax) technologies and comply with IEEE
802.11 a/b/g/n/ac/ax standards, the Wi-Fi data rate is up to 1800Mbps( 2.4GH z & 5.8GH z)
-- It supports Micro AC, local AC, cloud AC and WeChat Mini program management, and mesh networking.
-- It provides a cost-effective solution for indoor wireless network applications like villa, office, hotel, restaurants, shopping mall, stores, schools ect. High performance dual core processor, comprehensively improving the network load capacity, faster data forwarding, and more stable long-term operation

Main Features
--Dual frequency is faster and more stable with less interference
Based on the basic performance of hardware architecture and in-depth algorithm optimization of the underlying software, it effectively solves the performance degradation caused by external network signal interference.
Dual-frequency concurrency, both anti-interference and strong compatibility, provides protection for more wireless clients, and the concurrency of a single AP measured terminal can reach 60+ clients

--Using Qualcomm industrial-grade wireless chips
By optimizing the wireless AP, the stability is improved, the data is smoother, the broadband is more stable, and the carrier capacity is more, which is more advantageous in wireless networking and wireless coverage applications

--Wider coverage, better signal quality
Independent external power amplifier circuit (PA) and low-noise receiving circuit (LNA) further improve transmission performance, and at the same time, reduce reception interference, which can meet the performance of better performance, and can meet the wireless networking requirements in hotels / dormitories and other buildings with complex layout and many walls

--Automatically reject weak signal devices to improve performance
Intelligent identification, automatic elimination of weak signal equipment, to avoid weak signal equipment dragging down the entire wireless network efficiency, effectively save channel resources, thereby improving wireless roaming quality and the performance of the entire network

--Unified management of AC, support seamless roaming
Unified management of all APs through AC, plug and play, eliminate coverage dead corners, easy and seamless roaming, convenient wireless device managemen

Hardware Specification
Memories FLASH 16MB, DDR 256MB Protocols Comply IEEE 802.11 a/b/g/n/ac/ax, IEEE 802.3, IEEE 802.3 u, IEEE 802.3 ab
2.4GH z WiFi: 574Mbps, 2.412 GHz ~ 2.472 GHz (Channels 1~13)
5GHz WiFi: 1201Mbps, 5.180 GHz ~ 5.850 GHz (Channel 36~165)
TX Power 100mW

Ethernet Ports
1x 10/100/1000Mbps WAN, support POE 48V input, 1x 10/100/1000Mbps LAN

Power Supply DC 12V 1A, POE 48V (We only send 48V POE power adapter)

Modulation Type OFDM/BPSK/QPSK/DQPSK/DBPSK

Reset Button 1x Reset button, Restore factory default settings

Antenna Internal 5dBi x 4PCS

LED Indicator WAN, LAN

Working Temperature -10°C~+55°C

Storage Temperature -40°C~+80°C

Working Humidity 10%~90% RH(non-condensation)

Storage Humidity 10%~90% RH(non-condensation)

Package
1*Ceiling AP
1*48V POE power adapter
1*Network cable
1*English user manual