Question 1

is this the actual dvd burner itself our does this have to be placed internally?

Accepted Answer

Yes, this has to be placed internally in your pc.  It's not too hard to do though.  I installed mine and Windows 7 works just fine.

Question 2

We have a computer someone built for us at least 5 years ago.  The drawer for the CD/DVD stopped working and troubleshooting we found on youtube didn't change anything, so we assume we need to have a new one.  The old one is from Lite-on and is model number LH-20A1H185C.  Is this model compatible and will it do the same functions OK? Thank you :)

Accepted Answer

If you have an operating system with XP and newer any CD/DVD will work. These unites are plug and play. You OS should automatically recognize and install the driver. Just make sure all the plugs are connected properly. Make sure you purchase a CD/DVD with the proper connections for you computer. The older computers have a IDE ribbon connector ( a long plug with many pins). The newer computers have SATA connectors. (flat type cables with L shaped plugs. Hope you get your machine working.

Question 3

How loud is it?

Accepted Answer

quiet and working well out of the box.  easy to swap out of HP pavilion desktop.  plugged in cables and system downloaded the drivers for instant use w/o hassles.  no fit issues.  fast rips but have not tried to burn a disc yet.

Question 4

Hi, I want to know if this is compatible with the Cooler Master - HAF912 Mid-Tower?

Accepted Answer

Sure. The HAF912 uses a simple quick connect system that is compatible with any standard optical drive- such as this one.

Question 5

does it work with windows 10 64 bit?

Accepted Answer

This will work with any os, including Win10 x64

Question 6

I had DVD BU ASUS/DRW-22B2S/BLK/B/AS Will this replace it?

Accepted Answer

Here is the Link for an IDE DVD/CD RW from Newegg. I have this same unit in my Windows 7 Home Premium 32 Bit Desktop. https://www.newegg.com/Product/Product.aspx?Item=9SIA9AX77F4235&cm_re=internal_ide_dvd_burner-_-9SIA9AX77F4235-_-Product. Hope this Helps.

Question 7

I got one today without a manual oe=r any cords How do I proceed? John

Accepted Answer

Hello John,

This is the OEM (Original Equipment Manufacturer) version of the retail version of the LITE-ON DVD Burner. Unlike the retail or the “shrink wrap” version, the OEM version of any piece of computer hardware you purchase is sold without needed cables, accessories and user's manual in most cases. Often times you are much better off buying their OEM versions and get the missing parts separately. It is much cheaper this way if you are somewhat familiar with the piece you buy. If you need the user's manual you can always download it for free from the manufacturer's web site.

In any event, here is what you need to get your DVD burner installed and functioning:
1. Screws. A couple of screws to hold the DVD burner in place inside the computer case. You won’t even need these if the case you are using is tool-less, meaning you can just snap it in place without screws. I personally prefer using the screws because that’s a much better way of securing the drive to the case to avoid possible vibrations.

2. Data Cable. This is a SATA (Serial ATA or Serial Advanced Technology Attachment) DVD drive which means you will need a SATA Data Cable to connect the data port of the DVD drive (narrow 7-pin) to one of the SATA port headers on the computer's Motherboard. If the Motherboard has both SATA III (6 Gbps) and SATA II (3 Gbps) ports, then it's wiser to use the SATA II port because you won’t be wasting a much faster SATA III port for a much slower DVD drive and that will also save you a SATA III port for future use to add faster drives. Look for any SATA III data cable but make sure to pick the right length for your setup. You can get one right here for a buck or so.

3. Power Cable. This cable is part of the Power Supply Unit (PSU) so you won't need to get one. This is also a SATA power cable that brings power from the PSU to the DVD drive. It connects the SATA power port (wide 15-pin) of the DVD drive to the power supply SATA port.

I hope this helps and good luck!

Question 8

does it come with software?

Accepted Answer

No

Question 9

Is this model external?
Maurice C. Poulin

Accepted Answer

No this model is not external, but you can try this one:  LG USB 2.0 External Super Multi DVD Rewriter Model GE24NU40

Question 10

Will this model replace a Dell optical drive, item # 313-5270 from a Dell Inspiron 530 without any modification to the wiring/plug?

Accepted Answer

There are two things to consider. The age of your computer will determine whether you require an IDE drive or an SATA drive. The one you are looking at is an SATA drive. When you open your case and look at the back of the existing optical drive, other than the power connector, you will either see a wide, 40-pin ribbon cable (IDE) or a narrow 3/8" cable (SATA).
The second thing to consider is, my experience has been that these optical drives are almost universally interchangeable. However, I say almost because in a few rare occasions, a brand name manufacturer will alter the depth (only the depth) of the drive, usually by no more than 1/2 to 3/4" to accommodate close quarter in a 'compact' case. In that circumstance, you might have the drive protruding slightly from the front of the case, but the power connector and SATA connector are definitely the same, either way. Hope this helps.

Chris

Questions & Answers