MASSCOOL 5F263B1M3 80mm Ball CPU Cooler

Pros: None. This thing is still working and cooling like the day i bought it. Fan is working without any noise, and i couldnt be more happy.

Cons: None.

Pros: Installed two of these on an old Dual socket PIII board, running 1GHz processors. Pros are, held firmly to the processor, quiet, no vibration noticed at all, holding the processors at a steady 29C while under load, 26C at idle, cool so well I was able to eliminate two case fans and reduce noise, super good price for a quality product.......not a bad thing to say about this product, don't hesitate to purchase.

Cons: NONE

Overall Review: I don't think you could find a better product, even in a much higher price range.

Pros: price and performance....i got this because of my daughters old skool pc..it needed a better fan for a amd-3000 barton...this filled the bill nicely

Cons: none

Pros: I visited a friend I built a computer for over 4 years ago. I put this cpu heatsink/fan for the Athlon XP 1700 I put in his rig. I checked up on his computer and this cooler is still running like a champ! I used cream back then because Arctic Silver wasn't around and his cpu still idle's at 40c. There was a lot of dust and inside and I cleaned it out, I also applied some arctic silver and his cpu idle's at 35c. This is a great product that'll last a long time.

Cons: None

Pros: So quiet that I think I'm going to have to replace my power-supply. Doh!

Cons: Categorically refuses to take out the garbage OR mow the lawn.

Overall Review: Super-great deal.

Pros: Fan casing is made from aluminum alloy which helps a lot during cooling, since it is in tight contact with heatsink.Quiet as advertised, one of the best choices for any Socket A CPU considering the price of high performance heatsink would be 4 times more with same results.

Cons: One huge one is the bottom finish.I haven't seen anything as bad as this so far, BUT I spent 5 min with small file, 5 min with 600 grit sandpaper, 5 min with 1000 grit and 2 min with 2000 grit (can get one in any automotive store sometimes even in one set).So in 30 min I could see myself in copper base like in mirror and temp is 10 C degrees down.

Overall Review: For socket A you need only to polish the copper core which will be directly on CPU core.Use Arctic Silver 5 or Ceramique to lower temperature by 5 degrees more.Don't sink the CPU in thermal paste, apply only enough to make thin film if base is polished, it will be much safer and less messy for CPU.Besides bottom surface I would give more than 5 stars for its performance afterwards.

Pros: I have a PC with an AMD XP1800 CPU that was running 55c/64c, which is way to hot for this CPU. After installing the fan (see cons), the temperature dropped to 36c/43c, over 20 degrees C! It is quiet and is doing a great job, especially for the price.

Cons: When you first unbox this thing, you are overwhelmed by its size. It's huge! If you are restricted in space in your case, then this is not the fan for you. But if you have space, its perfect. It has a pyramid design, from big to small, with a huge heat sink and a huge fan.

Overall Review: Great packing, great workmanship, great fan.

Pros: I have an amd xp 2500 that i've been cooling with the stock heatsink and fan, which is so bad that i had to remove the sides of my case and use a box fan in order to bring the idle temp below 130F (it works by the way and is loud). I didn't have the money to get a good fan, and then i stumbled onto this. It works great, now I idle at 115 without the box fan and i can put the sides back on my case

Cons: It was a little difficult to install. I read some of the earlier reviews and i think it is much easier to do if you remove the fan,, but then putting the fan back on without screwing up the cpu can also be tricky

Overall Review: Pretty good for the money.