- Free 30-day Returns
$31.50
Meet Your Seller
Mayhems Blitz Basic | Part 2 (MBB)
- Mayhems Blitz System Kit is a single part highly effective cleaning system for liquid cooling loops
- Mayhems Blitz System kit is a whole system flush that will not only clean the system it can improve the overall performance of your system
- The Mayhems Blitz range was designed, developed, and tested using Mayhems Ultra Pure H2O, as a result, we advise using our H2O for the diluting and flushing stages
- Even though this is a cleaning solution it is not a long-term effective inhibitor
- In the box: 125 ml Mayhems Blitz System cleaning solution concentrate; Mayhems microsuede cloth; Rubber Gloves (1 pair)
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Mayhems Blitz System is a single part cleaning kit for a complete, assembled PC liquid cooling loop. It flushes out impurities, particulates and residues from the inside of blocks, radiators and tubing, ready for fresh coolant, and can improve the overall performance of the system. Use it for a new build, for routine yearly maintenance or for a color change.
Properties
- Type: Whole loop cleaning kit
- Concentrate: 125 ml Blitz System
- Mix: 125 ml with 1500 ml distilled water
- Run time: 6 to 12 hours
- Not for: Aluminum radiators
Step two of the Blitz process
Blitz System gives a thorough clean on its own, and Mayhems says the results are best when the radiators were prepared with Blitz Radiator first. Blitz Complete has both in one box. Mayhems designed, developed and tested the Blitz range with Mayhems Ultra Pure H2O and advises it for the diluting and flushing steps.
How to use
- New loop: check every fitting is tight. Coolant swap between clear coolants: flush with distilled water and drain 1 to 2 times first. After an opaque coolant: Mayhems strongly recommends a full teardown, several flushes and Blitz Radiator on the radiators first.
- Bridge the power supply so the pump can run on its own.
- Mix the whole 125 ml bottle of Blitz System with 1500 ml of distilled or purified water.
- Fill the loop through the reservoir, never let the pump run dry, and do not overfill: running Blitz System foams a lot.
- Run the pump for 6 to 12 hours and check for leaks.
- Drain, then fill with distilled water, run 5 to 10 minutes and drain. Do this four times in total.
Safety
- Blitz uses highly effective cleaning acids down to pH 2. Wear the gloves (and the goggles where supplied) and take proper safety measures.
- Not safe to use around children and animals. Keep the bottles out of their reach.
- Do not use on aluminum radiators.
- Blitz is a cleaner, not a long term inhibitor: never leave it in the system longer than 24 hours.
- Once diluted, the used fluid can go down the drain. Run a few liters of tap water after it.
Technical data
- Brand: Mayhems
- Product: Whole loop cleaning kit (Blitz Part 2)
- Concentrate: 125 ml
- Dilution: 125 ml concentrate with 1500 ml distilled or purified water
- Run time: 6 to 12 hours, then 4 flushes
- Acidity: Down to pH 2
- Not for: Aluminum radiators
- Instructions: Online (Mayhems Blitz kit instructions)
- Maker part number: MBKS
Notes
- For more loops, Mayhems also sells the Blitz System concentrate as a 1000 ml Professional bottle.
In the box
- 1x Mayhems Blitz System cleaning solution concentrate, 125 ml
- 1x Pair of rubber gloves
- 1x Mayhems microsuede cloth
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















