



How accurate is this scale at the milligram level?
It reads in 0.001 g steps up to 50 g. The stated error range is plus or minus 0.003 g and the smallest load it registers is 0.005 g, so a reading of only a few milligrams is approximate.
Is a calibration weight included, and how do I calibrate?
Yes, one 50 g weight is included. Hold UNIT until the value appears, press UNIT again until CAL flashes, place the weight in the center of the pan, and lift it off when PASS shows on the screen.
What does OLD on the screen mean?
OLD appears when the load passes 50 g or the scale was bumped in transit. Remove everything from the pan, turn the scale off, then turn it back on and it returns to normal weighing.
Why does the last digit drift or jump?
At 0.001 g resolution, air movement and vibration change the last digit. Use it on a flat, stable, draft-free surface, place items gently in the center, and for loads under 10 mg allow about 60 seconds of warm-up.
Which weighing units does it show?
Seven units: g, oz, ozt (troy ounce), dwt (pennyweight), ct (carat), tl (tael) and gn (grain). Press the UNIT button to move from one unit to the next.

Mcbazel Useful Gadgets




How accurate is this scale at the milligram level?
It reads in 0.001 g steps up to 50 g. The stated error range is plus or minus 0.003 g and the smallest load it registers is 0.005 g, so a reading of only a few milligrams is approximate.
Is a calibration weight included, and how do I calibrate?
Yes, one 50 g weight is included. Hold UNIT until the value appears, press UNIT again until CAL flashes, place the weight in the center of the pan, and lift it off when PASS shows on the screen.
What does OLD on the screen mean?
OLD appears when the load passes 50 g or the scale was bumped in transit. Remove everything from the pan, turn the scale off, then turn it back on and it returns to normal weighing.
Why does the last digit drift or jump?
At 0.001 g resolution, air movement and vibration change the last digit. Use it on a flat, stable, draft-free surface, place items gently in the center, and for loads under 10 mg allow about 60 seconds of warm-up.
Which weighing units does it show?
Seven units: g, oz, ozt (troy ounce), dwt (pennyweight), ct (carat), tl (tael) and gn (grain). Press the UNIT button to move from one unit to the next.




































































































