- Free 30-day Returns
Meet Your Seller
ModMyMods 5-Pin SATA "Push In" Female Connector - Black (MOD-0248)
- Looking to replace the dingy beige or faded black connectors on your PSU cable set
- We offer replacement connectors for every standard internal PSU, fan or SATA cable that you could need
- We offer a range of connectors and pins both individually or in sets.
- One of the easiest ways to make custom SATA cables
- Simply strip your wires and the are secured in place with with either an End Cover or Pass-Through Cover (not included) That's it!
Any questions? Ask CelesteSM will help you find out quickly.
The ModMyMods 5-Pin SATA "Push In" Female Connector - Black is one of the easiest ways to make custom SATA power cables. Strip your wires, lay them into the slots on the back of the connector and press them in, then close the back with an End Cover or a Pass-Through Cover (sold separately) to hold them in place. Because no factory-molded cable is needed, the SATA power wires can be sleeved just like all the other internal cables.
Properties
- Type: SATA power connector, push-in (insulation displacement)
- Wires: 5
- Wire termination: Stripped wire pressed into the slots
- Cover: End Cover or Pass-Through Cover, sold separately
- Color: Black
- Pieces in the pack: 1
Push in, cover, done
Five slots on the back of the connector take the five wires of a SATA power cable. Press each wire into its slot, then snap on a cover. The cover holds the wires down and closes the back of the connector. That is all it takes.
Pick the cover that fits your build
- End Cover (MOD-0249): ends the cable at this connector with a 90° termination.
- Pass-Through Cover (MOD-0250): lets the wires continue to the next SATA connector, for chaining several drives that sit close together on one cable.
Sleeved SATA cables
Molded SATA power plugs make sleeving difficult. With the push-in connector you route individually sleeved wires straight to the connector, so the SATA cables match the look of the rest of the build.
Technical data
- Article: MOD-0248
- Type: SATA power connector, female, push-in
- Wires: 5
- Cover: Sold separately (MOD-0249 or MOD-0250)
- Color: Black
Notes
- Check the wire order of your power supply cable before you press the wires in.
In the box
- 1x ModMyMods 5-Pin SATA "Push In" Female Connector - Black
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory







