- Free 30-day Returns
Meet Your Seller
NEMIX RAM 32GB (4 x 8GB) DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM Registered Server Memory Kit
- 32GB (4 x 8GB) DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM (Registered DIMM) Server Memory Upgrade
- NEMIX RAM ECC RDIMM for servers requiring DDR4 3200MHz PC4-25600. NOT FOR PC Computers
- NEMIX RAM offers Lifetime Replacement Warranty
Any questions? Ask CelesteSM will help you find out quickly.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by NEMIX RAM Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
The NEMIX RAM 32GB kit is four 8GB DDR4-3200 ECC registered DIMMs for compatible servers that use 288-pin RDIMM memory, making it suitable for server upgrades that require this specific memory type.
Recommended For
- IT administrators upgrading a compatible DDR4 server that accepts ECC registered RDIMMs and needs 32GB total across four 8GB modules; check the server’s supported memory configuration before installing.
- Homelab builders running a server motherboard that specifically supports DDR4 ECC RDIMMs and want a matched 32GB kit for a small virtualization or services host.
- Operators maintaining supported DDR4 server or workstation platforms who need to replace or add memory while keeping to an ECC registered DIMM configuration.
- Owners of supported DDR4-3200 server platforms who want a four-module kit; the system may run the memory below 3200 MT/s if its processor or memory configuration supports a lower speed.
Real-World Use Scenarios
- Running a small Proxmox homelab: On a server that supports DDR4 ECC RDIMMs, use the 32GB kit to host a few lightweight Linux or Windows VMs and containers; available memory can be divided among them, but the number and size of guests will need to stay modest.
- Building a VM test lab: Use the memory for separate Windows or Linux environments to test updates, configurations, or software before deploying them elsewhere; with 32GB total, assigning memory carefully helps avoid pressuring the host when several VMs run at once.
- Expanding a compatible server used for shared files or backup services: The kit adds 32GB of system memory for the operating system and server tasks, which can provide room for a modest setup; actual capacity needs depend on the services and storage configuration.
- Replacing or adding memory during server maintenance: For a system whose CPU and motherboard support DDR4-3200 ECC registered DIMMs, the matched four-module kit can provide a 32GB memory upgrade; check the server’s qualified memory types and configuration because RDIMMs are not compatible with ordinary desktop motherboards.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | ECC-registered DDR4 memory upgrades for compatible servers requiring a 32GB four-module configuration |
| Capacity And Configuration | 32GB total across four 8GB modules |
| Memory Speed And Timing | DDR4-3200 (PC4-25600), CAS latency 22, 1Rx8 rank |
| Error Correction And Registration | ECC, registered DIMM |
| Voltage | 1.2V |
| Memory Chip Manufacturers | Samsung, Micron, or Hynix |
| Model Identifiers | NEMIX RAM; part number MR25600-818K4-SM-AS-4124GO-NART+ |
Reference Q&A
Q: Should I choose this 32GB kit or NEMIX RAM’s 64GB (4×16GB) DDR4-3200 RDIMM kit?
A: Choose the NEMIX 64GB (4×16GB) kit when your server workload benefits from twice the memory capacity; both kits are DDR4-3200 ECC registered memory. Choose this 32GB (4×8GB) kit when 32GB meets your capacity needs. Confirm your server supports the module capacity and four-DIMM configuration.
Q: For 32GB of DDR4-3200 RDIMM, should I get this 4×8GB kit or NEMIX RAM’s 2×16GB kit?
A: Both configurations provide 32GB of DDR4-3200 ECC registered memory. Choose this 4×8GB kit when you want to install four modules; choose NEMIX’s 2×16GB configuration when you prefer to use two modules and keep more slots available for a later upgrade. Follow your server’s memory-channel population guidance.
Q: Is this 32GB 4×8GB kit or a NEMIX 32GB 1×32GB DDR4-3200 RDIMM better for an upgrade?
A: Both provide 32GB at DDR4-3200. Choose this kit when you want a four-module configuration; choose the 1×32GB option when you want the capacity in one module and more slots available for expansion. Check system compatibility and memory-slot population guidance before choosing.
Q: Should I choose this DDR4-3200 kit or NEMIX RAM’s 32GB 4×8GB DDR4-2933 kit?
A: Choose this DDR4-3200 kit when your server supports that data rate; choose the NEMIX DDR4-2933 4×8GB configuration when 2933 is the speed specified for your system. Both options provide 32GB in four ECC registered modules, and the system’s supported memory speed determines the operating rate.
Q: Will this memory work in a regular desktop PC?
A: Generally, no. This kit is ECC Registered DIMM (RDIMM) server memory, not standard unbuffered desktop memory. Use it only in a system whose motherboard and processor support DDR4 ECC RDIMMs.
Q: How can I tell if this kit is compatible with my server?
A: Check the server and processor documentation for support for DDR4 ECC Registered DIMMs, 1Rx8 modules, and the kit’s 3200 MT/s speed. Also confirm the system’s supported memory configurations and slot-population rules; the product listing alone does not establish compatibility with every server.
Q: How much memory is included, and how many modules are in the kit?
A: The kit contains 32GB total as four 8GB DDR4-3200 ECC Registered DIMMs.
Q: Can I mix this kit with the memory already installed in my server?
A: Compatibility depends on the server’s memory rules and the installed DIMMs. Before mixing, verify that the system supports the combined ECC Registered DIMM configuration, including capacity, rank, speed, and population layout. Do not assume it can be combined with unbuffered memory.
Q: Will this memory work in a regular desktop PC?
A: No. This kit is registered ECC RDIMM server memory, and the product listing says it is not for PC computers. Use it only in a system that specifically supports DDR4 registered ECC RDIMMs; Reddit discussions also warn that some boards support ECC UDIMMs but not RDIMMs.
Q: How can I check whether this kit is compatible with my server?
A: Check the server or motherboard documentation for support for DDR4-3200 ECC registered DIMMs, then verify the processor’s memory support and the required module configuration. NEMIX’s installation video for a different DDR4-3200 RDIMM module also advises checking compatibility for the specific system; it does not confirm compatibility with every server.
Q: Can I mix this kit with the RAM already in my server?
A: Mixing brands may work, but it is not guaranteed. A Reddit discussion mentions matching rank as one consideration; this kit is 1Rx8, so check that your server supports that configuration and compare the existing memory’s type, speed, rank, and capacity before mixing. Using a matched configuration is the safer choice.














