Nippon Labs 35FT Hybrid Active Optical Fiber HDMI Cable; 8K@60Hz 4K@120Hz Dynamic HDR 10, eARC, HDCP2.2, 4:4:4 48Gbps CL3 Rated, 8K High Speed HDMI 2.1 Active Optical Cable (AOC) cable - 20AOH8KCL3-35FT

The Nippon Labs 20AOH8KCL3-35FT is a 35-foot HDMI 2.1 hybrid active optical cable with 48Gbps bandwidth, designed for long-distance 8K connectivity in home theaters, studios, and commercial installations; it supports eARC, HDR, and HDCP 2.2 without an external power supply.

Recommended For

• Home-theater owners routing a source from an AV cabinet to a distant TV or projector who need a 35-foot run for high-bandwidth video; active optical cables are used for long HDMI runs where passive copper can be less dependable.
• PC or console gamers whose 4K/120Hz-capable display is across the room and who want to carry high-refresh-rate video over a long cable run.
• Installers planning a fixed residential or commercial AV route who need a long HDMI connection and a CL3-rated jacket; check local code and the complete installation requirements before putting it in a wall.
• AV users connecting a distant source directly to a display who can route the cable with its source and display ends oriented correctly; community discussions regularly flag direction as important for active optical HDMI.

Real-World Use Scenarios

• For a ceiling-mounted projector across a room, run the cable from an AV receiver or media player to the projector; the 35-foot optical run is intended to carry high-bandwidth video over that distance without placing the source beside the screen. Connect the labeled Source and Display ends correctly.
• For a console or gaming PC connected to a distant TV or projector, use the long run to keep the gaming device near a desk or equipment shelf while the display stays across the room. 4K at high refresh rates is possible only if the source, display, settings, and the complete HDMI path support it.
• When installing a display in a conference room or classroom, route the cable from a presentation PC or room AV system to a screen or projector located elsewhere in the room. This can reduce the need to place the source device beside the display; confirm the connected equipment supports the video format you plan to use.
• For a permanent in-wall home theater run, the CL3-rated jacket is relevant when routing the cable through a wall cavity. Check local installation requirements and route the directional cable with its Source end at the signal-producing device and Display end at the screen.
• For a living-room setup where the AV receiver or PC is kept away from the TV, use the cable to bridge the equipment location and display without moving the devices closer together. The cable does not need a separate power supply, according to the product listing.

Spec Summary