Question 1

How well would these cool while attached to an H110 Corsair Liquid Cooling system? I would rather use these since they are quieter but I want the best cooling performance as well.

Accepted Answer

while noctua makes makes what i believe are the best fans on the market, i wouldn't mount a round frame fan on a square radiator, plus you should really have something optimized for static pressure.

noctua has fans which would suit this purpose. while you're at it, check out linus tech tips on youtube and look for their review of the cooler you wish to use as they do all their cooling benchmarks with notcua fans so they could tell you which particular model is best for that application.

Question 2

Does it come with screws to mount to case?

Accepted Answer

I forgot which fan this was when I first commented. This is for adding on to your CPU heatsink. It does not come with screws but metal clips/brackets to hook onto the heatsink.

Question 3

Will this fan make a good replacement for the one on the Cooler Master Hyper 212 EVO? While I love the cooler for drastically dropping temps, on Turbo Mode, it's LOUD. I know that with the Noctua cooler, clips are used (an extra set shipped with my NH-D15S), will it mount to the CM Hyper 212 EVO using it's native plastic clips & if needed, the supplied Noctua (long) rubber washers or inserts to prevent vibration (I assume that's what the four included ones are for)? Being these are for a Noctua product, may or may not work as intended on the Hyper 212 EVO, nor may be needed.

Accepted Answer

Yes, This fan works great on any heat sink you can attach it to. I have several and they work great as Heatsink fans or as Fans on my Cooling Radiator for a Push-Pull EKWB water cooled system. I have yet to burn one out and they are quiet.

Question 4

Does this fan come with the metal heat sink clips?

Accepted Answer

No clips, Clip come with heat sink.

Question 5

My rear fan is 140mm x 140mm x 25mm. Would this fit? I know this fan has compatibility issues with sizing.

Accepted Answer

I haven't had any clearance issues replacing other 140mm fans with the  Noctua NF-A15.  I have one on top, bottom, and one on CPU heat sink.  This would of course depend on the case you are using.  Post your case and maybe others can comment.

Question 6

Anyone know the static pressure or rated life span?

Accepted Answer

Information about the Static Pressure MTBF as well as more technical data could be found here, just add www ahead of the link 
noctua.at/main.php?show=productview&products_id=54&lng=en&set=1

Question 7

Will this fit in the front of the 380T?

Accepted Answer

Yes it will fit it but only on the 140 side and no where else.

Question 8

How well would these cool while attached to an H110 Corsair Liquid Cooling system? I would rather use these since they are quieter but I want the best cooling performance as well.

Accepted Answer

These are meant for air coolers, you need to look at square or "box" frame fans. Like the NF-A14 (140mm) or the NF-F12 (120mm) which are made for water coolers.

Question 9

Can this fan fit in a CoolerMaster V8 GTS?

Accepted Answer

No - the V8 has custom fan shrouds that allow them to mount. No aftermarket fan will fit without modding them.

Questions & Answers