The OWC 1R6T32R416GB is a 16GB DDR3L-1600 ECC registered RDIMM for compatible servers and workstations that use 240-pin, 1.35V, 2Rx4 memory; it is not intended for standard desktop PCs or systems using unbuffered memory.
Recommended For
- Owners of a compatible Supermicro DDR3 server replacing a 16GB MEM-DR316L-CL-series module; check the board and CPU memory rules before installing.
- Administrators maintaining older DDR3 servers who need a 16GB ECC registered DIMM matching a system that supports DDR3L-1600, 2Rx4 RDIMMs.
- Operators expanding memory in a legacy server or NAS that explicitly supports registered ECC DDR3 DIMMs and has an available compatible slot.
- Workstation owners whose specific motherboard and processor support DDR3 ECC registered memory and whose memory configuration calls for a 16GB 2Rx4 RDIMM.
Real-World Use Scenarios
- When an older compatible Supermicro server needs a failed DIMM replaced, this module can restore memory capacity if the board supports the matching registered-memory type and its installation rules are followed.
- For a home-lab server running several virtual machines or containers, adding memory can give those workloads more room to run concurrently; the usable increase depends on the server’s supported DIMM configuration.
- When upgrading a compatible older home server for NAS or file-server duties, adding memory can provide more capacity for the operating system and services; it does not by itself increase storage capacity or guarantee faster file transfers.
- For a budget home-lab build using a compatible Supermicro DDR3 server platform, this module can add memory without replacing the whole system; check the motherboard manual before installation because registered and unbuffered DIMMs are not interchangeable.