ABS function (automatic brake): This function only adjusts the throttle channel, including six kinds of parameter settings, automatic brake settings to adapt to different models of track, to achieve the best braking effect and cornering control effect.
Rc Crawler Truck CRAWL function (climbing car mode), SVC function (smart car control mode), gyro stability function. 4 Climbing Mode ----- With 4 Climbing Mode, revolutionary control optimization for climbing cars, easier handling, more freedom to distribute functions
Product Description
Flysky FS-GT5 Radio Transmitter & FS-BS6 Gyro Receiver
Flysky FS-GT5 Radio Transmitter & FS-BS6 Gyro Receiver 6 Channel Remote Controller for Rc Car, Rc Crawlers, Rc Boat
Flysky FS-GT5 transmitter using 2.4GH z AFHDS 2A system, with strong active and passive anti-interference ability. With FS-BS6 receiver, the output of 6 channels, compatible model cars, boats and other models.
ABS function (automatic brake): This function only adjusts the throttle channel, including six kinds of parameter settings, automatic brake settings to adapt to different models of track, to achieve the best braking effect and cornering control effect.
F. SAFE Function (Fail-Safe
Protection): This function can protect the safety of the model when the receiver can not receive the signal from the transmitter normally, and move the actuator arm to the pre-set position.
CRAWL function (climbing car mode), SVC function (smart car control mode), gyro stability function.
FS-GT5 can store 20 models, each model can set the parameters separately, but also can write the model name easy to remember.
Package include:
FS-GT5 Transmitter *1
FS-BS6 Receiver *1
User manaul *1
Start up using the remote controller
Battery Type: AA or 2S Lithium battery (JST port inside battery compartment) NOT INCLUDED.
Battery Installation:
Open the battery compartment coven
Insert 4 AA batteries with the correct polarity.
Select appropriate size 2S 7.4V lithium battery with a J ST connector. Make sure it is connected with the correct polarity to avoid damage.
Replace battery compartment coven
Power On FS GT5 and Bind the BS6 Receiver
Follow the steps below to turn on the transmitter:
1.
Make sure that:
The battery is fully charged and installed correctly.
The receiver is installed correctly and powered down.
2. Move the power switch to the [On] position.
3. Connect the power supply to the receiver.
Note Operate with caution in order to avoid damage or injury.
Note Make sure that the throttle is at its lowest position and the switches are set to their up position.