6 sets of welding auxiliary tools, including cutting, scraping, hooks, brushes, and other welding work requirements.
Cutting pliers: made of high-quality steel, can precisely cut soft wire within 1 millimeter.
Desoldering pump: can remove excess solder from the circuit board.
Anti-static ESD tweezers: made of high-quality stainless steel, anti-static, non-sticky.
The welding kit includes 1 desoldering pump, 2 anti-static tweezers, 6 pieces of welding auxiliary tool set, 1 desoldering wick, 1 cutting pliers
How to use the tin absorber:
1. First, press down the piston of the tin aspirator until it is stuck.
2. Heat the solder joint with electric iron until the solder melts.
3. While removing the electric soldering iron, quickly paste the solder nozzle on the solder joint, and press the solder button.
4. It is not clean at one time and can be repeatedly operated for many times.
Tips for using the tin aspirator:
(1) Make sure that the piston of the tin aspirator is well sealed. Before power on, use your fingers to plug the small hole of the solder receiver head, press the button, if the piston is not easy to pop in place, it means that the sealing is good.
(2) There are different sizes of the hole diameter of the solder receiver head, so it is necessary to select the appropriate specification for use.
(3) After using the old head, replace it with a new one in time.
(4) Before touching the solder joint, dip a little rosin every time to improve the fluidity of solder.
(5) The time for the head to contact the solder joint is a little longer. When the solder melts, take the solder joint pin as the center, draw a circle clockwise by hand, and then press the solder aspirator button
The kit includes:
6 * Welding Auxiliary tools
1 * Desoldering pump
1 * Unsoldering core
1 * Wire cutters
2 * anti-static ESD tweezers
6 sets of welding auxiliary tools, including cutting, scraping, hooks, brushes, and other welding work requirements.
Cutting pliers: made of high-quality steel, can precisely cut soft wire within 1 millimeter.
Desoldering pump: can remove excess solder from the circuit board.
Anti-static ESD tweezers: made of high-quality stainless steel, anti-static, non-sticky.
The welding kit includes 1 desoldering pump, 2 anti-static tweezers, 6 pieces of welding auxiliary tool set, 1 desoldering wick, 1 cutting pliers
How to use the tin absorber:
1. First, press down the piston of the tin aspirator until it is stuck.
2. Heat the solder joint with electric iron until the solder melts.
3. While removing the electric soldering iron, quickly paste the solder nozzle on the solder joint, and press the solder button.
4. It is not clean at one time and can be repeatedly operated for many times.
Tips for using the tin aspirator:
(1) Make sure that the piston of the tin aspirator is well sealed. Before power on, use your fingers to plug the small hole of the solder receiver head, press the button, if the piston is not easy to pop in place, it means that the sealing is good.
(2) There are different sizes of the hole diameter of the solder receiver head, so it is necessary to select the appropriate specification for use.
(3) After using the old head, replace it with a new one in time.
(4) Before touching the solder joint, dip a little rosin every time to improve the fluidity of solder.
(5) The time for the head to contact the solder joint is a little longer. When the solder melts, take the solder joint pin as the center, draw a circle clockwise by hand, and then press the solder aspirator button
The kit includes:
6 * Welding Auxiliary tools
1 * Desoldering pump
1 * Unsoldering core
1 * Wire cutters
2 * anti-static ESD tweezers