5-Pack 10inch Under Cabinet Lighting, 2400mAh Rechargeable Motion Sensor Light, Magnetic Closet Lights with Dimmable & 3 Color Temps, Wireless Motion Activated Lights with Remote for Kitchen

Remote Control for
Multi-Light Convenience: Adjust brightness, color temperature, timer settings, and lighting modes from one remoteno need to take each light down and change settings one by one. Designed for multi-light setups under cabinets, in closets, pantries, hallways, and stairs, making everyday lighting simpler to manage. 2400mAh Battery for
Reduced Recharging: Each light contains a high-capacity rechargeable battery to help minimize how often you remove lights for charging, particularly in multi-light setups. Runtime depends on mode, brightness, and
daily motion frequency: approximately 1445 days in Motion Sensor Mode, or up to 12 hours in Always-On Mode at 100% brightness. Contains five individual USB-C charging cables for convenient multi-light recharging. Recharges in around 3 hours. Please charge fully before initial use. Motion Sensor & 3
Lighting Modes: The built-in sensor detects motion within 120° and up to 12 ft, activates in 0.1 seconds, and turns off automatically after about 20 seconds in motion-sensing modes. Select Night Motion for low-light use at night, All-Day Motion for cabinets, pantries, and dim corners whenever motion is detected, or Always-On for steady lighting while cooking, cleaning, or organizing. Adjustable Light for
Everyday Use: Select 3000K Warm White for softer nighttime use, 4500K Natural White for everyday visibility, or 6500K Cool White for brighter kitchen tasks. With 120 lumens of clear, usable light, stepless dimming from 10% to 100% allows you to fine-tune brightness for cabinets, closets, pantries, stairs, and work areas, while memory function retains your last setting for simpler daily use. Easy Magnetic Installation, No
Drilling Required: Built-in magnets attach directly to metal surfaces, while included adhesive metal plates function on smooth non-metal surfaces. The lights can be taken off easily for charging and snapped back into position. For optimal adhesion, press firmly and allow the adhesive to set for 24 hours before attaching the lights