COB LED Strip Light Warm White, High Bright LED Strips with 2400LEDs, RF Remote and UL Power Supply, 3000K Dimmable LED Lights for Bedroom, Kitchen, DIY Home Decoration

No Dark SpotThe COB LED strip light 3000K features no dark spots and no glare, with soft light, no mercury, no UV, safe to the eye. The 3000K LED COB tape light creates a completely smooth and uniform output, ideal for seamless linear lighting. The 2400 LEDs (480 LEDs/m) high-density design avoids dark areas in the middle section. The Highlights of COB LED LightsThe COB strip lighting offers a 180-degree beam angle, low power consumption, high luminous efficiency, and a high color rendering index (90+). The high CRI makes objects look more high-end.

Comes with a UL-listed power supply for the warm white COB LED strip light kitjust plug in and enjoy the bright light. Dimmable via RemoteThe upgraded RF remote is 360° multi-directional. The 3000K warm white COB LED strip light offers adjustable speed and mode for single color, and lets you change brightness as you like (from dim to quite bright 100LM). It operates at 24V DC low voltage and emits extremely low heat, making it safe and touchable for even little kids and pets. Easy to InstallSimply stick the flexible COB strip light onto a clean, dry, and smooth surface.

The slim and sleek strip is flexible and can be used for corners. It is easily cuttable every 1.96 in / 50 mm, and you can connect other COB strip lights to achieve your desired DIY length. Widely UsedThe COB LED strip light works well with diffuser covers to help spread light more evenly and reduce light dots. It is ideal for decorative lighting, suitable for recessed or surface mounting to tie in with furniture, under cabinets, shelves, balconies, Halloween bars, drywall, living rooms, hotels, wooden partitions, and shopping malls.

How to check if the adhesive layer is correctly attached: 1. After removing the yellow protective film, gently touch the white backing of the LED strip. If it feels sticky, the adhesive layer is properly attached and ready for installation. If it does not feel sticky, the transparent adhesive layer may have peeled off together with the yellow protective film. 2. If the adhesive layer comes off accidentally: Reattach the yellow protective film to the back of the strip, then slowly peel it off again while ensuring the transparent adhesive layer stays attached to the strip backing. Once the backing feels sticky, the strip is ready to install