Why does the reflective sticker not stick?
- It may be that the surface of the object to be pasted is uneven/curved, so it doesn't take up firmly and cause it to fall off
- Reflective sticker adhesion will decrease when the temperature drops in winter
Solution:
1. Paste flat objects
2. Heat the reflective sticker with a blower to increase the temperature and viscosity
If the above methods are still not sticky, you can apply for a new reflective sticker
INSTALLATION STEPS
Wipe
Clean the spot you want to stick and dry it with a towel.
Remove
Peel off the back of the high reflective tape.
Apply
Align the sticker to the desired location and slowly apply from one side to the other.
Press highly reflective tape for 10 seconds after applying.
Show
In a slightly dark environment, the reflection effect shown by the flash camera.
The difference between large and small reflective tapes
 Small Reflective Sticker |  Large Reflective Sticker |  Small Rectangle Reflector |
|---|---|---|
Colour Contains 6 different colours: red, white, blue, green, yellow and orange | Colour per piece Red & White | Colour Red, yellow and white – choose any combination |
Length and width 30 mm * 80mm | Length and width 50 mm * 300mm | Length and width 3.14inch L * 1.37inch W |
Feature No scissors to cut | Feature No scissors to cut | Feature PVC and 3M adhesive backing |
Application Function Adhesion to small objects | Application Function Adhesion to large vehicles | Application Function Reflective Patch for frame enhance safety protection |
Same feature Reflective | Same feature Reflective | Same feature Reflective |
Can I reapply it after tearing it?
No. Find the right position before you stick it, and you can't stick it for the second time after it's torn off by mistake.
How about the sticking performance, will it hurt the car paint?
Reflective sticker backing for pressure-sensitive adhesive, sticking firmly without hurting the car paint. Paste 48 hours after not afraid of rain and high-pressure water gun rinse, 72 hours completely solid.
Why do I receive reflective stickers with white lines?
Due to the special nature of the production process of full-prism reflective film, large rolls of reflective film every 1.5 metres or so there will be a processing line. So buyers receive the product on the processing line is a normal phenomenon.
How to remove it if I don't want to use it?
If you want to tear it off after a long time of sticking, please use a hair dryer to heat it up and then slowly remove it. The residual glue can be wiped off with a rag dipped in alcohol and other volatile liquids, or removed with an adhesive remover
How to test the car reflector stickers? Test conditions must be in black dark environment
At a distance of 5 metres, a strong reflection can be seen by shining a light on the reflective sticker.
20 meters away, the reflective sticker was illuminated by the car's high beam, and strong reflections were visible in the cab.
PSLER
PSLER is a brand dedicated to meeting the different needs of customers for motorcycle car and bike.
How did we get our start?
PSLER was established in 2017 and is committed to providing modified parts, replacement parts, decorative parts and various accessories for motorcycle users.
What makes our products unique?
Complete vehicle models and accessories, timely updates of the latest product information.Provide customers with quality after-sales service
Why do we love what we do?
We stand behind our product and Provide cost-effective products.We are happy to listen to our customers' suggestions and we will find the accessories they want.
Bicycle Accessories
Nice choice
Try our best to give customers a good purchasing experience.
Bicycle Accessories
Spoke SKins
Perfectly used for all kinds of bicycles, motorcycles, road vehicles, mountain bikes and children's bicycles and other wire wheels.
Why does the reflective sticker not stick?
- It may be that the surface of the object to be pasted is uneven/curved, so it doesn't take up firmly and cause it to fall off
- Reflective sticker adhesion will decrease when the temperature drops in winter
Solution:
1. Paste flat objects
2. Heat the reflective sticker with a blower to increase the temperature and viscosity
If the above methods are still not sticky, you can apply for a new reflective sticker
INSTALLATION STEPS
Wipe
Clean the spot you want to stick and dry it with a towel.
Remove
Peel off the back of the high reflective tape.
Apply
Align the sticker to the desired location and slowly apply from one side to the other.
Press highly reflective tape for 10 seconds after applying.
Show
In a slightly dark environment, the reflection effect shown by the flash camera.
SUITABLE FOR VARIOUS POSITIONS
Mower
Scooter
Helmet
Smartphone
Drone
Backpack
The difference between large and small reflective tapes
Can I reapply it after tearing it?
No. Find the right position before you stick it, and you can't stick it for the second time after it's torn off by mistake.
How about the sticking performance, will it hurt the car paint?
Reflective sticker backing for pressure-sensitive adhesive, sticking firmly without hurting the car paint. Paste 48 hours after not afraid of rain and high-pressure water gun rinse, 72 hours completely solid.
Why do I receive reflective stickers with white lines?
Due to the special nature of the production process of full-prism reflective film, large rolls of reflective film every 1.5 metres or so there will be a processing line. So buyers receive the product on the processing line is a normal phenomenon.
How to remove it if I don't want to use it?
If you want to tear it off after a long time of sticking, please use a hair dryer to heat it up and then slowly remove it. The residual glue can be wiped off with a rag dipped in alcohol and other volatile liquids, or removed with an adhesive remover
How to test the car reflector stickers? Test conditions must be in black dark environment
At a distance of 5 metres, a strong reflection can be seen by shining a light on the reflective sticker.
20 meters away, the reflective sticker was illuminated by the car's high beam, and strong reflections were visible in the cab.
PSLER
PSLER is a brand dedicated to meeting the different needs of customers for motorcycle car and bike.
How did we get our start?
PSLER was established in 2017 and is committed to providing modified parts, replacement parts, decorative parts and various accessories for motorcycle users.
What makes our products unique?
Complete vehicle models and accessories, timely updates of the latest product information.Provide customers with quality after-sales service
Why do we love what we do?
We stand behind our product and Provide cost-effective products.We are happy to listen to our customers' suggestions and we will find the accessories they want.
Bicycle Accessories
Nice choice
Try our best to give customers a good purchasing experience.
Bicycle Accessories
Spoke SKins
Perfectly used for all kinds of bicycles, motorcycles, road vehicles, mountain bikes and children's bicycles and other wire wheels.
