MikroTik - MTAD-5G-30D3-PA - MikroTik mANT30 Antenna 4.7-5Ghz 30dBi Dual-Pol 45deg Slant Dish with Precision Alignment

MTAD-5G-30D3-PA - The MikroTik mANT30 is a professional class 30dBi dish antenna designed to seemlessly work with the MikroTIk BaseBox, can be adjusted to a slanted polarization at 45 degrees and features a precision alignment mount. The MikroTik MTAD-5G-30-series is a carrier-class 30dBi antenna, designed to seamlessly with MikroTik Basebox for a backhaul Point to Point link. Installing the BaseBox onto the antenna requires no special tools, you simply snap it into place with the mounts provided and voila. a powerful long-range Point to Point link is at your fingertips. This dish can be adjusted to a slanted polarization at 45deg.

The instructions can be found here.
Slant Features: • Reduce RF interference in signal congested areas • Reduce the impact on local microwave devices • Unify the channel output if link deployed over a body of water Product Includes • 1 x Dish Antenna • 2 x RP-SMA Male to RP-SMA Male Cables • 1 x Mounting Bracket for BaseBox Radio • Self-Bonding Tape for Insulating RF Cables • Precise Alignment Mechanisms Electrical
Specifications • Frequency Range: 4.7 - 5.875 GHz •
Gain: 30dBi typically •
Dual Polarization: Vertical and Horizontal • 3dB
Beamwidth: +/- 2.5 deg •
Standards: Complies with EN 302 326 DN1, DN2, DN3, DN5 •
VSWR: = 1.4 type, = 1.8 max • Port to
Port Isolation: >40dB min •
Front-to-Back Ratio: >30 dB •
Cross Polarization: >40 dB •
Power Rating: 100 watts •
Impedance: 50 ohms •
Elevation adjustment range: +/- 15 deg Physical/Environmental
Specifications • Reflector: Aluminum •
Outdoor Rating: ETSI EN 300 019-2-4 •
Wind Survivability: 125mph (201kph) •
Wind Load (125 mph): 400 lbs, 174 lbs with radome •
Connector (2): Type RPSMA Technical Data Sheets and
User Manuals: MTAD-5G-30D3-PA Data Sheet MikroTik MTAD-5G-30D3-PA Assembly Guide MikroTik mANT30 Polarization Slant Guide m ANT30 is a professional class 5 GHz 30d Bi dish antenna, built to the highest industry standards. Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included Flex Guide cable. Two antennas are available, with a standard type mount ( MTAD-5 G-30 D3), and with a precision alignment mount ( MTAD-5 G-30 D3- PA). The antennas come packaged with all necessary accessories and cables. Product specifications Details Product code MTAD-5 G-30 D3- PA Beamwidth +/- 2.5 deg Certification CE, ROHS Connector 2x RP- SMA Female (outside thread) Cross Polarization >40 d B Diameter x Depth 70 x 45cm ( 27.5 x 17.8 in) Elevation adjustment range +/- 15 deg Frequency Range 4.7 - 5.875 GHz Front-to- Back Ratio >30 d B Impedance 50 ohms MTBF Approximately 200'000 hours at 25 C Outdoor Rating ETSI EN 300 019-2-4 Packaged size 73x73x20cm (29x29x8in) Packaged weight 8.4 kg (18, 5) Polarization Vertical and Horizontal Pole Mount Diameter Range 3 to 10cm ( 1.2 to 3.9 in) Port to Port Isolation >40d B min Power Rating 100 W Reflector Aluminum Standards EN 302 326 DN1, DN2, DN3, DN5 Tested ambient temperature -50° C to 80° C(-49° F to 158° F) VSWR = 1.4 typ, = 1.8 max Weight 5.7 kg ( 12.6 lbs) Wind Load (125 mph) 181.4 kg (400 lbs), 50 kg at 40 m/s, 28 kg at 30 m/s Wind Survivability 201kph (125mph)