Wood Moisture Meter Water Leak Detector with Backlit LCD Display, Temperature & Humidity Measurement, Pin-Type for Wooden Material Mortar Plywood Firewood Concrete Wall Paper Floor Carpet HT633

This product is a DC resistance type (pin type) material moisture meter, commonly used to measure the moisture content of wood or building materials. The moisture content of the material is displayed directly as a percentage.

Features:

Large LCD with Backlight: Large LCD display with backlight, clear to read, even under the dim light.

Practical Functions: It supports single point measurement, multi-point average measurement, maximum and minimum measurement, data hold and low battery indicator.

7 Different Kinds of Materials: The instrument has built-in characteristic parameters of 7 different kinds of wood and building materials. This measurement can provide a basis for the need for further drying.

Ambient Humidity and Temperature: In addition to measuring the moisture content of the material, the ambient humidity and temperature can also be measured so that the dry environment can be evaluated directly on site.

Auto Shut Down: Without any operation, the meter will automatically shut down after about 10 minutes to save battery energy. (It can be cancelled when starts up)

Technical Specifications

Sensor: Resistance type (conductivity measurement), high precision temperature, and humidity sensor

Material Comparison Table: Material A: Beech, spruce, larch, birch, cherry, walnut: 8.8~54.8 % Material B: Oak, pine, maple, ash, Douglas fir, Eucalyptus: 6.8~47.9% Material C: Cement mortar layer, concrete: 0.9~22.1% Material D: Anhydrous gypsum mortar layer: 0.0 ~11.0% Material E: Cement mortar: 0.7~8.6% Material F: Lime mortar, gypsum: 0.6~9.9% Material G: Brick: 0.0~16.5%

Temperature Measuring Range: -20.0~60.0°C (-4.0~140.0°F) Accuracy: 0.0~45.0°C (32~113°F) ±1.0°C /2.0°F, Other: ±1.5°C /3.0°F

Humidity Measuring Range: 0.0% ~99.9%RH

Accuracy: 20%~80%: ±5.0RH, Other: ±6.0RH

Ambient Temperature: -20.0~60.0°C(-4.0~140°F) ±1.5°C

Ambient Humidity: 0.0~99.9% ±4.0%RH

Use Environment: -10 ~50°C / 20 ~90%RH

Storage Environment: -10 ~60°C / 20 ~90%RH

Power: 3x1.5V AAA Alkaline battery

7 Calibration Scales

It is designed with built-in characteristic parameters of 7 calibration scales for wood and building material, ranging from 0.0% to 99.9%. This mold meter perfect for woodworking, water damage restoration, building construction, and home renovation. Easily Check and test suspicious water leaks around the wall/floor so you can quickly determine what level of remediation is needed to keep your home safe from water damage and mold spread