ACEMETER Electronic Digital Caliper Measuring Tool, 6 inch Stainless Steel Digital Vernier Caliper,IP54 Waterproof Protection Design
DO YOU HAVE TROUBLE GETTING PRECISE MEASUREMENTS QUICKLY AND EASILY? NEED TO FIND IRREGULAR OR HARD-TO-MEASURE DIMENSIONS? Then you need our ACEMETER Electronic Digital Caliper Measuring Tool.
Why choose ACEMETER Electronic Digital Caliper.
1.Premium Material: Heavy duty waterproof stainless steel body, dust protected and splash water resistant.
2.Digital Caliper Measurement Range: 0-6 Inches/150mm; Resolution And Accuracy: 0.01mm/0.0005"
3. 4 Ways of Measurement: External measurement, Internal measurement, Depth measurement and tep measurement.
4.Unit Conversion: A one-key button to quickly switch from inch/millimeter.
5.Auto On/Off: Auto turns on when sliding, auto turns off after 5mins if with no operation.
6. Zero Calibration: The smart design allows you to easily reset to zero by pressing a button to measure next section.
External Diameter
Use the external measuring jaws for outside dimensions. It can be measured quickly and accurately by stuck the object between two parallel sides of big Jaws and holding it in place by set screw.
Internal Diameter
Need to get an internal width measurement, such as for a bearing or the inside width of a shaft. It can measure the inner diameter of objects by the top jaws of digital caliper.
Step
Step measurements are accomplished with ease, from one surface to the next, by using the bottom back edge of the external measuring jaw and the top back edge of the internal measuring jaw.
Depth
It can measure the depth of objects by the long probe of digital caliper. Even the depth of objects which is difficult to reach, the depth of something can be easily measured
IP54 protection-Waterproof,Dustproof ,Oilproof
It Has IP54 Level Of Liquid Resistance, Water Resistance And Dust Resistance. Compared With Plastic Calipers, Stainless Steel Calipers Have A Longer Service Life and Wider range of use
Easy Battery Replacement
- Using the provided mini screwdriver, remove the screw on the same side as the slider clamp screw( Do not to lose the screw since it's so small).
- Once the screw is removed, the battery cover on the opposite side will come loose and the battery will easily come out, then replace the new battery.
- Replace cover and hold it in place, re-insert the screw and tighten.
Package Includes
1x Digital Caliper
1x Protective Case
1 x Screwdriver
1X 3V, CR2032 battery + One spare battery
1x User guide
Specifications
Material:IP54 Waterproof Stainless Steel
Size: 9.2 x 3 x 0.6 in
Weight: 14 oz
Measuring Range: 0-6 inches/0-150mm
Accuracy: ±0.02mm/0.001”
Resolution: 0.0005”/0.01mm
Battery: 3V, CR2032 button cell
Notice: If you find the readings are not accurate, please slide the LCD screen to the left end (“0” on the scale), and then press the zero button.
WHO WE ARE?
ACEMETER has focused on industrial-grade measuring tools for 20 years. Providing Innovative measuring tools and electronic products to meet both professional and DIY demands.
We have always adhered to the enter prise tenet of "Integrity-based, qualit first and customer first and are com mitted to the goal of "make your life easier. The huge customer group is the basis and support for growth of the compan.
ACEMETER Digital Caliper
ACEMETER Measuring Tools
ACEMETER Digital Angle Finder
ACEMETER Electronic Digital Caliper Measuring Tool, 6 inch Stainless Steel Digital Vernier Caliper,IP54 Waterproof Protection Design
DO YOU HAVE TROUBLE GETTING PRECISE MEASUREMENTS QUICKLY AND EASILY? NEED TO FIND IRREGULAR OR HARD-TO-MEASURE DIMENSIONS? Then you need our ACEMETER Electronic Digital Caliper Measuring Tool.
Why choose ACEMETER Electronic Digital Caliper.
1.Premium Material: Heavy duty waterproof stainless steel body, dust protected and splash water resistant.
2.Digital Caliper Measurement Range: 0-6 Inches/150mm; Resolution And Accuracy: 0.01mm/0.0005"
3. 4 Ways of Measurement: External measurement, Internal measurement, Depth measurement and tep measurement.
4.Unit Conversion: A one-key button to quickly switch from inch/millimeter.
5.Auto On/Off: Auto turns on when sliding, auto turns off after 5mins if with no operation.
6. Zero Calibration: The smart design allows you to easily reset to zero by pressing a button to measure next section.
External Diameter
Use the external measuring jaws for outside dimensions. It can be measured quickly and accurately by stuck the object between two parallel sides of big Jaws and holding it in place by set screw.
Internal Diameter
Need to get an internal width measurement, such as for a bearing or the inside width of a shaft. It can measure the inner diameter of objects by the top jaws of digital caliper.
Step
Step measurements are accomplished with ease, from one surface to the next, by using the bottom back edge of the external measuring jaw and the top back edge of the internal measuring jaw.
Depth
It can measure the depth of objects by the long probe of digital caliper. Even the depth of objects which is difficult to reach, the depth of something can be easily measured
IP54 protection-Waterproof,Dustproof ,Oilproof
It Has IP54 Level Of Liquid Resistance, Water Resistance And Dust Resistance. Compared With Plastic Calipers, Stainless Steel Calipers Have A Longer Service Life and Wider range of use
Easy Battery Replacement
- Using the provided mini screwdriver, remove the screw on the same side as the slider clamp screw( Do not to lose the screw since it's so small).
- Once the screw is removed, the battery cover on the opposite side will come loose and the battery will easily come out, then replace the new battery.
- Replace cover and hold it in place, re-insert the screw and tighten.
Specifications
Package Includes
1x Digital Caliper
1x Protective Case
1 x Screwdriver
1X 3V, CR2032 battery + One spare battery
1x User guide
Material:IP54 Waterproof Stainless Steel
Size: 9.2 x 3 x 0.6 in
Weight: 14 oz
Measuring Range: 0-6 inches/0-150mm
Accuracy: ±0.02mm/0.001”
Resolution: 0.0005”/0.01mm
Battery: 3V, CR2032 button cell
Notice: If you find the readings are not accurate, please slide the LCD screen to the left end (“0” on the scale), and then press the zero button.
WHO WE ARE?
ACEMETER has focused on industrial-grade measuring tools for 20 years. Providing Innovative measuring tools and electronic products to meet both professional and DIY demands.
We have always adhered to the enter prise tenet of "Integrity-based, qualit first and customer first and are com mitted to the goal of "make your life easier. The huge customer group is the basis and support for growth of the compan.
ACEMETER Digital Caliper
ACEMETER Measuring Tools
ACEMETER Digital Angle Finder
