The stud detector quickly locates wood and metal hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. Helping you find the exact stud while installing TVs, cabinets, garage shelves etc.
ST102 stud finders are great for locating the studs behind your walls. Knowing where those are is crucial so you can be sure to screw into them instead of just the drywall when you’re hanging something heavy, like a mirror or a mount for, say, a flat-screen TV. Its small profile is easy enough to store in a drawer or toolbox until you need it. No matter professionals, homeowner and DIY enthusiasts, it must be an ultimate choice
Package Included:
- 1 x Stud Finder
- 1 x 9V Battery
- 1 x User Manual
- Standard Factory Package
Quick locate the stud/metal/pipe/joist/behind the wall/ceiling etc
When calibrating, if the stud finder is just in the center of the wood, the product can also be tested directly to the center of the stud
- 3/4 inches deep detection for wood and metal
- Stud finder with light indicator & audio alarm
- Its small profile is easy enough to store in a drawer or toolbox
- One-step operation, just press the button
- Application for installing TVs, picture frame, cabinets, garage shelves, etc.
- Scanning different surfaces: lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc.
Stud Scan Detection
Metal Scan Detection
Pipe Scan Detection
How To Use eOUTIL ST102 Stud Finder?
Step 1: Calibrate before every scan
Place unit flat on wall, press and hold the ON/OFF button at the left side. The red light and green light will flash and the unit will beep.
When the green light (Power Indicator) stays illuminated, the calibration is completed. Do not move the unit before calibration
Step 2: Scan the wall
First slowly slide the stud finder, lock the approximate position of the wood stem (For more accurate test results )
Press the button and slowly move the digital wall scanner along the wall.
* If you shake or accidentally lift the scanner, you will need to recalibrate the device
Step 3: Find the location of the stud
Then beeping sound and 4 signal strength light will let you know there is an edge, mark it !
Same process from another slide, you will get another edge, you found the stud
Detection is achieved using two different methods:
1. Magnetic
Uses powerful magnets to pinpoint the location of screws or nails in a stud. Therefore it doesn't detect the stud itself but rather the hardware that attaches the wall material to the stud.
2. Electronic
Electronic stud finders rely on sensors that detect changes in the dielectric constant (the relative permittivity) of the wall. This changes when the sensor is over a stud. The lower reading indicates the presence of a stud in the wall and the signal will let you know by the colored lights. eOUTIL ST102 stud finder is an electronic style.
*When the product battery is lower than 7.8V, the product may indicate low voltage, the first yellow LED light will flash, and the buzzer will sound, indicating that the product can no longer be tested at this time, and a new 9V battery needs to be replaced
WHO WE ARE?
eOUTIL was founded in 2004, focusing on providing new & Innovative measuring tools and electronic products, and has passed CE\FCC\UL, ISO9001 BSCI, and other certifications.
WHAT YOU WILL GET?
Here, you can get top-grade wall detectors, digital levels & angle rulers, automotive diagnostic tools and equipment, building materials & wood moisture meters, ultrasonic & laser distance meters, electrician testers, socket testers, etc.
eOUTIL Angle Finder Series
BEST SELLERS
WHO WE ARE?
eOUTIL was founded in 2004, focusing on providing new & Innovative measuring tools and electronic products, and has passed CE\FCC\UL, ISO9001 BSCI, and other certifications.
WHAT YOU WILL GET?
Here, you can get top-grade wall detectors, digital levels & angle rulers, automotive diagnostic tools and equipment, building materials & wood moisture meters, ultrasonic & laser distance meters, electrician testers, socket testers, etc.
eOUTIL Angle Finder Series
BEST SELLERS
The stud detector quickly locates wood and metal hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. Helping you find the exact stud while installing TVs, cabinets, garage shelves etc.
ST102 stud finders are great for locating the studs behind your walls. Knowing where those are is crucial so you can be sure to screw into them instead of just the drywall when you’re hanging something heavy, like a mirror or a mount for, say, a flat-screen TV. Its small profile is easy enough to store in a drawer or toolbox until you need it. No matter professionals, homeowner and DIY enthusiasts, it must be an ultimate choice
Quick locate the stud/metal/pipe/joist/behind the wall/ceiling etc
Package Included:
- 1 x Stud Finder
- 1 x 9V Battery
- 1 x User Manual
- Standard Factory Package
When calibrating, if the stud finder is just in the center of the wood, the product can also be tested directly to the center of the stud
- 3/4 inches deep detection for wood and metal
- Stud finder with light indicator & audio alarm
- Its small profile is easy enough to store in a drawer or toolbox
- One-step operation, just press the button
- Application for installing TVs, picture frame, cabinets, garage shelves, etc.
- Scanning different surfaces: lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc.
Stud Scan Detection
Metal Scan Detection
Pipe Scan Detection
How To Use eOUTIL ST102 Stud Finder?
Step 1: Calibrate before every scan
Place unit flat on wall, press and hold the ON/OFF button at the left side. The red light and green light will flash and the unit will beep.
When the green light (Power Indicator) stays illuminated, the calibration is completed. Do not move the unit before calibration
Step 2: Scan the wall
First slowly slide the stud finder, lock the approximate position of the wood stem (For more accurate test results )
Press the button and slowly move the digital wall scanner along the wall.
* If you shake or accidentally lift the scanner, you will need to recalibrate the device
Step 3: Find the location of the stud
Then beeping sound and 4 signal strength light will let you know there is an edge, mark it !
Same process from another slide, you will get another edge, you found the stud
Detection is achieved using two different methods:
1. Magnetic
Uses powerful magnets to pinpoint the location of screws or nails in a stud. Therefore it doesn't detect the stud itself but rather the hardware that attaches the wall material to the stud.
2. Electronic
Electronic stud finders rely on sensors that detect changes in the dielectric constant (the relative permittivity) of the wall. This changes when the sensor is over a stud. The lower reading indicates the presence of a stud in the wall and the signal will let you know by the colored lights. eOUTIL ST102 stud finder is an electronic style.
*When the product battery is lower than 7.8V, the product may indicate low voltage, the first yellow LED light will flash, and the buzzer will sound, indicating that the product can no longer be tested at this time, and a new 9V battery needs to be replaced