Shore A Digital Hardness Tester 0~100HA | Type A Durometer for Rubber, Plastic & Leather | 0.5HA Resolution | Large LCD Display | Portable with Data Hold

High-Precision Mechanical Design: The unit features a high-grade probe with a 02.5 mm stroke, a 35° included angle, and a flat cone point diameter of 0.79 mm. It delivers a resolution of 0.5HA against a total measure force of 8.1N.;
User-Friendly Operational Features: The device is designed for ease of use with a large LCD display, a "Hold" function to lock measured values, zero-setting capability, and an On/Off switchall housed in a lightweight, portable casing that is maintenance-free.;
Optimal Sample Requirements: For the most accurate results, the tester requires a sample thickness of at least 6mm. If the sample is thinner, you may layer up to three pieces, and measurements should be taken at least 18mm from the outer edge to ensure validity.;
Application Scope: This Type A durometer is specifically designed to measure the medium penetration hardness of soft materials such as rubber, plastic, leather, multi-grease, and wax.;
Precision & Compliance: Delivers ultra-accurate readings with a 0.5HA resolution and a large LCD display, conforming to international standards including ISO 868-1986, ISO 7619, and GB/T 531.1 -2008, with CE Marking for European health and safety requirements.