Specification: Basic function Range DCV: 600mV/6V/60V/600V ±(0.5%+5) ACV: 6V/60V/600V ±(0.8%+5) DCA: 60A/200A/800A ±(1.5%+5) ACA: 60A/200A/800A ±(1.5%+5) Resistance: 600/6k/60k/600k/6M/60M ±(0.8%+1) Capacitance: 6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Frequency: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±(0.5%+4) Temperature: (-40~1000 )/(0~1832 ) ±(1.0%+5) Resolution: 1/1 Special function: Diode test: Continuity test: Less than 50±10, it will be shown OL when it is above 600 Low battery indicator:Approx. less than 2.4 V Data hold: NCV: Auto power off:About 15 minutes Trms test: Function protection: Clamp light: Backlight display: Input impedance:10M Sampling rate:3 times/s AC frequency response: Current 40-1kHz/ voltage 40-2kHz Operation method:Auto or manual range Max display:6000 Clamp opens:28mm Battery:3V (2*AAA battery) General Characteristic: Meter color:Orange and Black Meter weight:About 200g (including battery) Meter size: 185mm×65mm×32mm Standard accessory:Test leads, battery, manual, temperature probe,alligator clip Features: Non-contact voltage detection, practical and convenient way to test electrical lines The default AC voltage measurement range is 48-1000V, it can also measure 12-1000V by adjusting the sensitivity; Using the ABS and PVC material, the Voltage Tester can stand wear and tear, and its pocket clip allows easy handling; Auto power-off feature conserves energy while the LED torch allows operation even on dark corners; Live/Neutral wire distinguish at close range; Automatic selection of 3 kinds of sensitivity (High,Medium,low); Audible and visual alarm always guard your safety; The shining prompt of low voltage LCD can warn you to replace the battery in time; And meanwhile, the Auto Power Off feature can extend battery usage time.