Your Browsing History
Meet Your Seller
Water Heater, Pool Heater, Immersion Bucket Water Heater, Submersible Water Heater 304 Stainless Steel Guard with Controller, Pool Heater for Above Ground Pool to Heat 5 Gallons of Water in Minutes
- Intelligent heating and power off: The heating time and heating temperature can be set freely. After waiting, the controller will complete your settings and automatically disconnect the power to stop heating to avoid fire. Remember, the heating time should not exceed 3 hours, it is easy to overheat and burn out the controller! ! !
- Read To Avoid Fire: The heater must be completely immersed in water under working conditions. Before touching the water with your hands, please unplug the power plug first, and then take out the water heater! Please do not use it continuously for more than 3 hours! If your bathtub or small swimming pool has a large capacity and needs to heat more than two water heaters at the same time, Can be used with two water heaters,but do not plug the two water heaters into the same socket !!!
- Heating efficiency: The immersion water heater has a rated power of 1500W, which can quickly heat 5 gallons of water. The protective case is made of high-quality stainless steel a
+
+
Overview
Specs
Reviews
I know you may ask such questions, please read these FAQs
Here are a lot of buyers with the same questions for your reference
Q: Can this water heater be used in above ground swimming pools?
A: Of course, but not all above-ground swimming pools can be used. It can be used for some mini portable swimming pools, but it is not suitable for larger swimming pools, because its power cannot achieve rapid preheating.
Q: If it is a small pool, what is the recommended capacity and how long does it take to heat up?
A: Our 1500W immersion water heater is recommended to have a maximum capacity of 40 gal. But if you heat 40 gal of water, you need to wait about 3 hours. So buy two and put them in the water together and heat at the same time be more efficient and faster to save more time, just remember not to plug the two heaters into the same outlet, it will trip
Q: If I set the temperature and time, then I let it heat itself to the temperature I set right?
A: No, you have to observe the water in the swimming pool about once an hour to see if it is completely submerged in the water heater. If the water heater is dry, a fire will occur and cause a safety accident, so someone must be guarded.
Q: Is this compatible with my RV?
A: It doesn't fit your RV. It needs more current. The home current can fit it
Q: What is the voltage and power of this water heater? For what purpose?
A: Rated
voltage: 120V, 1500W power, it is very versatile, you can use it in the kitchen to heat washing water, you can also use it to heat the water in a small swimming pool, and it can also heat the water in the livestock tank to prevent freezing in winter, So it is a four-season product, heating the small swimming pool in summer and heating the water in the bathtub in winter.
Setting Steps:
After power is on, the screen will show three [000], and the first [0] is flashing.
If you do not need to book heating time, short press the [set] button three times, and you enter the temperature setting page. Then set the temperature by [+][-]; [set] to confirm. If set [45C] means the temperature will automatically power off when it reaches 45 degrees. The default temperature of the product is 50 degrees. Set the temperature, press the [set] key to start heating, and display the real-time water temperature. Real-time water temperature will continue to rise until it reaches the set temperature, it will automatically power off and sound the alarm.
If you need to set the appointment heating time, adjust by [+][-], [set] to confirm. If set (120] means it is 120 minutes after the product starts heating. [At this time, the reservation time 120 will keep flashing, indicating that it enters the countdown stage, just wait, no need to press set to confirm, if you press set to confirm, it will start heating directly].
Other Settings:
If you want to modify the temperature or appointment time in the middle, long press the (set] key to re-enter the settings page, set the steps once again.
If you want to stop heating in the middle, you can short press [set] to stop heating, and then short press [set] to reheat, the indicator will be indicated.
If not unplugged, when the water temperature is lower than the set temperature of 5 degrees Celsius, the product will automatically re-open the heating mode, and then heated to the set temperature, and automatically power off, the cycle of heating.
Attention:
If there is continuous heating, please check if the temperature probe is not fully immersed in the water.
Set the heating temperature at least 5 degrees higher than the original water temperature to activate the heating rod.
The water heater can be set to boil up to 99 degrees, but the boiling point varies from place to place.
Here are a lot of buyers with the same questions for your reference
Q: Can this water heater be used in above ground swimming pools?
A: Of course, but not all above-ground swimming pools can be used. It can be used for some mini portable swimming pools, but it is not suitable for larger swimming pools, because its power cannot achieve rapid preheating.
Q: If it is a small pool, what is the recommended capacity and how long does it take to heat up?
A: Our 1500W immersion water heater is recommended to have a maximum capacity of 40 gal. But if you heat 40 gal of water, you need to wait about 3 hours. So buy two and put them in the water together and heat at the same time be more efficient and faster to save more time, just remember not to plug the two heaters into the same outlet, it will trip
Q: If I set the temperature and time, then I let it heat itself to the temperature I set right?
A: No, you have to observe the water in the swimming pool about once an hour to see if it is completely submerged in the water heater. If the water heater is dry, a fire will occur and cause a safety accident, so someone must be guarded.
Q: Is this compatible with my RV?
A: It doesn't fit your RV. It needs more current. The home current can fit it
Q: What is the voltage and power of this water heater? For what purpose?
A: Rated
voltage: 120V, 1500W power, it is very versatile, you can use it in the kitchen to heat washing water, you can also use it to heat the water in a small swimming pool, and it can also heat the water in the livestock tank to prevent freezing in winter, So it is a four-season product, heating the small swimming pool in summer and heating the water in the bathtub in winter.
Setting Steps:
After power is on, the screen will show three [000], and the first [0] is flashing.
If you do not need to book heating time, short press the [set] button three times, and you enter the temperature setting page. Then set the temperature by [+][-]; [set] to confirm. If set [45C] means the temperature will automatically power off when it reaches 45 degrees. The default temperature of the product is 50 degrees. Set the temperature, press the [set] key to start heating, and display the real-time water temperature. Real-time water temperature will continue to rise until it reaches the set temperature, it will automatically power off and sound the alarm.
If you need to set the appointment heating time, adjust by [+][-], [set] to confirm. If set (120] means it is 120 minutes after the product starts heating. [At this time, the reservation time 120 will keep flashing, indicating that it enters the countdown stage, just wait, no need to press set to confirm, if you press set to confirm, it will start heating directly].
Other Settings:
If you want to modify the temperature or appointment time in the middle, long press the (set] key to re-enter the settings page, set the steps once again.
If you want to stop heating in the middle, you can short press [set] to stop heating, and then short press [set] to reheat, the indicator will be indicated.
If not unplugged, when the water temperature is lower than the set temperature of 5 degrees Celsius, the product will automatically re-open the heating mode, and then heated to the set temperature, and automatically power off, the cycle of heating.
Attention:
If there is continuous heating, please check if the temperature probe is not fully immersed in the water.
Set the heating temperature at least 5 degrees higher than the original water temperature to activate the heating rod.
The water heater can be set to boil up to 99 degrees, but the boiling point varies from place to place.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by CANVR. YT Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...