FCR-3 is a plug-in electric callus remover that does not use batteries, it must be plugged into an outlet to use.

- How do I turn on the machine?
- First, plug in the power cord, then turn on the switch at the bottom, and finally adjust the speed level on the touchscreen.
- How is the machine powered?
- This is a plug-in electric callus remover—it is not battery-powered! Please keep the power cord plugged in while using the machine.
- How do I use the machine correctly?
- Apply the proper pressure, and the machine will rotate normally.
- The machine has 10 speed settings, the higher the setting, the greater the pressure it can withstand.
- To prevent accidental injury, the machine will shut down if the pressure exceeds its limit. Simply restart the machine, and it will resume working.
- What if the grinding head is loose and won't rotate?
- Remove the grinding head and reinstall it, rotate it to locate the groove, push it firmly into place.
- When using the machine, ensure the power cord is securely connected to prevent it from shutting down.
- To extend the machine's lifespan or overheating, do not use it continuously for more than 30 minutes at a time.
- Do not touch the control panel with wet hands, keep the panel clean to prevent it from responding slowly.
- ......
FCR-3 is a plug-in electric foot callus remover that does not use batteries, it must be plugged into an outlet to use.







FCR-3 is a plug-in electric callus remover that does not use batteries, it must be plugged into an outlet to use.

- How do I turn on the machine?
- First, plug in the power cord, then turn on the switch at the bottom, and finally adjust the speed level on the touchscreen.
- How is the machine powered?
- This is a plug-in electric callus remover—it is not battery-powered! Please keep the power cord plugged in while using the machine.
- How do I use the machine correctly?
- Apply the proper pressure, and the machine will rotate normally.
- The machine has 10 speed settings, the higher the setting, the greater the pressure it can withstand.
- To prevent accidental injury, the machine will shut down if the pressure exceeds its limit. Simply restart the machine, and it will resume working.
- What if the grinding head is loose and won't rotate?
- Remove the grinding head and reinstall it, rotate it to locate the groove, push it firmly into place.
- When using the machine, ensure the power cord is securely connected to prevent it from shutting down.
- To extend the machine's lifespan or overheating, do not use it continuously for more than 30 minutes at a time.
- Do not touch the control panel with wet hands, keep the panel clean to prevent it from responding slowly.
- ......
FCR-3 is a plug-in electric foot callus remover that does not use batteries, it must be plugged into an outlet to use.

















































