Working temperature: 0° C -55°
C Operating humidity: 80%
R Working voltage: 1.5V
product description:
1. Large screen, large font LCD reading, very convenient (there is no problem that JMs have difficulty reading with traditional mercury thermometers)
2. Water-proof type, which can be rinsed with water after daily measurement, and can also be disinfected with alcohol regularly
3. Buzzer prompt, after the measurement is finished, the buzzer prompts automatically (I don't know how long the mercury is, it doesn't have this concern)
4. High precision, accuracy up to ± 0.5?, the minimum scale reading can reach 0.1
5. Convenient readin accurate measurement, non-mercury and other advantages, with beep prompt and memory function 6, can be used to measure and calculate women's ovulation cycle, can also be used in homes, hospitals and other occasions to measure and observe the basic body temperature of the human body
Instructions:
1. Before use, disinfect the thermometer sensor head with alcohol 2. Press the power button, the buzzer will beep, and the prompt symbol will be displayed
3. Subsequently, the display shows the last measured temperature for 2 minutes, then the ° C symbol on the display flashes, indicating that it is in the state to be measured
4. Put the thermometer head into the measurement area, the display shows that the temperature gradually rises. At the same time, the ° C symbol flashes, indicating that the measurement is in progress. If the temperature remains unchanged for 16 consecutive minutes, the ° C symbol stops blinking, indicating that the body temperature measurement is completed and the measurement results have been memorized, and the displayed temperature value can be read
5. After the measurement is completed, if the power is not pressed to turn off the power, it will automatically shut down after 8 minutes
6. When the thermometer is used, it is more accurate to wait for about 20 seconds after the power is turned on
Precautions: Measure + 0.5 ° C under the armpit, do not beat, bend, do not use high temperature disinfection, do not touch chemical solvents or thinners, do not disassemble!