30W Wall PoE Injector Adapter 802.3at / 802.3af Compliant,10/100Mbps RJ-45 for 48V PoE Supported IP Cameras and Phones up to 328 Feet

30 Watts PoE + Injector. Converts a non-PoE 100Mbps port to a PoE or PoE + 100Mbps port and network a PoE device located up to 100 meters (328 ft. ) Away. If you have a PoE + ( 802.3 at) or PoE ( 802.3 at ) standard device, and need to use PoE technology to provide it with both network and power, this PoE adapter is your best choice.
Auto-sensing technology delivers up to 30 Watts to an 802.3 at PoE + device with backwards compatibility for 802.3 af PoE ( 15.4 Watts) devices. It can detect POE equipment and non-POE equipment. For POE equipment that meets 802.3 at or 802.3 af standards, it will communicate with the equipment and provide appropriate power. For non-standard POE equipment, it will automatically detect and actively power off to protect the equipment. This is very smart and safe.
100Mbps Ethernet Speed. This PoE injector equiped with 1 100Mbps Ethernet port input and 1 PoE + 100Mbps Ethernet port output, which NOT support Gigabit Devices.
Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. Whether you want to use it with an IP camera in your home or work place, a VoIP phone used in a conference room, or use it to provide power and network to a wireless AP, this PoE injector is very suitable as long as your device is 802.3 af or 802.3 at standard in 10/100Mbps networks.
Compact and cost effective PoE+ injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection.